Reviews

I am 6'8" tall, the stock windshield just as well have not been there, this is my third one on different bikes and I love them. Jo likes it too, her ears were getting beat to death with the stock one.

I bought the above windshield for my '22 FXLRST, and finally got to go for a decent ride with it. It's a night & day difference compared to the stock shield. The wind noise & buffeting has been drastically reduced, and it's a alot more comfortable ride now. Thanks to Clearview Shields for an awesome product!

The pros:
-Family owned company.
-Amazing product.
-Super easy install

The cons:
NONE!!!
-Made in the USA!
-Supports our vets!
-Amazing customer service!

Good people to deal with, excellent communication. Very well made, fits factory brackets perfectly. Noticeable reduction in turbulence vs factory shield. Highly recommended.

I'm very happy I purchased this for my Low Rider ST. Purchased the small which is 2.5" higher than OEM and it makes a world of difference at freeway speeds. From unbearable at 75+MPH after 20 minutes to several hours with no fatigue. The only issue is the fit, along the bottom is doesn't fit flush and sticks out several mm causing a gap. I still recommend, but they should clean the fit up better.

This is my second wind screen I have purchased from this company. I was extremely satisfied with my first that went on my Vulcan 900. The latest one is for my Harley low rider st. The quality is spot on.

I really like the product, the finish is very high quality. The fit is outstanding. It was an exact fit for my non detach 1990 Heritage. I will be ordering another one in a couple weeks a couple inches shorter. Highly recommend this product.

Changed out the stock shield with a 16” recurve and works perfect. I am 5”10 , I can see over it nicely and it keeps the air just above my head. looks so much better than stock. Fit is perfect. Highly recommend

Yes it took quite awhile to receive it , but this windscreen is absolutely top notch quality . Fit was perfect, thicker stronger and just plain beautiful. Yes well worth the wait !!!!

Ordered the 19" with the vent. It is a little wider and taller than the HD 19" windshield.
This is the first HD I owned that has a windshield. First I had alot of helmet bobble with my full face. I added fork deflectors that helped and now changed out to this windshield. I am a tall rider and this helped out alot. I also like the vent option for air flow in slow traffic or town riding. Highly recommend, it works great and looks great on my 2017 HD Road King.

Replaced the windshield on my 99 Goldwing. I knew my other shield was bad but wow what a difference. It is so much clearer especially noticeable at night. Was super easy to install and fits perfectly.

Great product. Better customer service, they took care of the little details via phone call and got me the right shield when I was mistaken on what model. Definitely will recommend and use for future windshields

I ordered the XL and at 5’-10” with the stock seat, I think I need the medium size. Windscreen does a great job at increasing the rider pocket and deflecting the wind over your helmet. The screws that were sent were too short and had to use the stock screws to mount to the fairing.

Excellent! I didn't expect the black opaque tent along the bottom of the screen. I thought it was going to be all clear like I [thought] I ordered. However, after installing it, I became aware that it would make the dash board easier to read because it blocked the light coming in over the instruments. Thanks for knowing more about what I needed that I did.

I’m 5’10” and can still look over it. Blocks wind pretty good. One thing I can say is it is way thicker than the stock. That’s the one thing I noticed when I took it out of the box heavier gauge plastic. Overall I’m happy with it. Thanks.

Got the medium, dark tint, without the vent for my 2022 Low Rider ST. The windshield of Clearview is so much better than the stock one, it is unbelievable. The difference between night and day. It also looks really nice on the bike.

Next to that the friendliness of the team is remarkable. They really know what customer service means.

In short a very recommendable good product.

Clearview makes a great product. It is thicker than most stock windshields and wider. The slight curve a the increases the down force on the front end, and makes for a bigger air pocket for the rider. This was my third purchase from them. I started buying their product in 2010.

The stock screen on my 2013 Ultra Classic did not work for the one size fits all. I am 6'4" and the stock wind-shield is actually too tall (who knew) and decided on a large, 10.5"L (lowering the height ~2"), +5"W, Light Gray tint with 5 position vent. This windshield is extremely well finished and a perfect fit. With these dimensions I can, in my normal riding position just see over it and I can comfortably slump down slightly behind the Windshield as required. The 5-position vent works exceptionally well and drastically reduces wind noise under 55mph when open and is a breath of fresh air (pun intended) during these 100*F humid Kentucky days. Air flow goes straight over me and the passenger. Totally recommend these windshield. It has drastically improved the ride comfort. Definitely a five-star product.

these are great windshields.I have one on my 2002 kawasaki nomad and one on my 2008 vulcan classic 900lt.Both stock windshields cracked and are half as thick as the clearview shields.

I received my Triumph Thunderbird 1600 Quick Release Roadster Windshield and was very pleased with the product. The windshield installation went well and fit perfectly with existing hardware like a glove. After several bike rides, the windshield design and quality are excellent. Well worth the money...thank you Clearview Shields!

Waited well over a month for this. When it arrived it 1.was not as wide as my old Givi, yet 2.my brake levels hit it(they didn't hit the Givi) 3.although I ordered an XL, it isn't much talker than the Givi. 4 The vent whistles. but worst of all: 5. ITS OPTICALLY FLAWED AND DISTORTS THE VISION OF THE ROAD DRAMATICALLY. Overall, its like they didn't even TRY to engineer this product. I should've bought a Givi, for immediate delivery and a lot less money.

Excellent product. I’m very happy with my new windshield. It’s a perfect fit and added the additional protection that I needed. I would recommend Clear View Shields to anyone wanting to improve their windshield.

Top quality product and better design than OEM, fit perfectly just like my other one. Good communication and updates from company. Worth waiting for, very pleased!

Other than an extended completion time, the windshield is excellent, fits well, had very little issues with transferring the hardware from the old windshield.

I'm satisfied with the windshield. It fit perfect. The customer service leaves much to be desired. I called on many occasions to ask about windshield options. Never spoke to any one. Finally took a shot in the dark and ordered the windshield. A month later sent an e mail to check status. Got an email stating the time between ordering and when to check status. After that time went by I sent another e mail checking status. This time I got an email saying they were delayed. Another month after that I checked again. Another delay. Finally got the shield after quite some time. Product quality. 5 stars customer service 1 star. Honestly if they weren't the only game in town for a sidecar windshield. I'd have bought somewhere else.

It’s a quality windshield. It arrived when promised. It bolted right on to the stock mounting hardware. And Arianne did a great job on the customer service. 5Stars! Excellent!

Removes 80% of bugs from flying in my face. Less rider fatigue due to less wind in my chest. Only downside is slight buffeting but that’s expected with this type of wind screen. Overall very happy with purchase.

Perfect fit, bolts right on without a problem, very quick notifications about any changes in the order or shipment tracking, would most definetely recommend and order again.

The Low Rider ST is a great bike but two standard pieces of equipment are, in my opinion, stupid: The "heavy breather" and the OEM windshield. I think they were chosen by some misguided focus group.

I'm 5'10" and the Size M Vented is all I needed. Some people my height think it's too short but I don't. I think visually, it "fits" the bike well, too.

Bottom line: It's cheaper than the HD Tall windshield and probably just as good, if not better and it doesn't leave my wishing for something better.

Good quality and it fit well, so Installation went smoothly. It's a bit higher than I anticipated so I see through it instead of over it, but it works very well and should be great in the colder weather. I bought the tall windshield with the vent, so airflow is good when needed in hot weather. I certainly will buy from them again if the need arises.

I am so glad I found this website. The shield was beautiful and the re-shape was awesome. I took it a step furthur and got the 5-Vent. All I can say is i'm telling my riding club check these guys out. They are made right here in Colorado. Must support home.

Quick delivery for made to order! Soooo much better than OEM is not even funny. Thicker, love the curved top. I have the light grey and it is the perfect tint. fit hardware perfectly! I'm a fan!

This is my third shield from Clearview, All three have worked perfectly. Would offer a shout out to Tonya for making sure my order was shipped in time for my journey to Milwaukee for the HD 120th

Am so pleased with my Clearview Shield. After researching and reviewing my options I went with a taller and wider Shield for my 2022 Harley Davidson Heritage Classic 114. I also added curve at top, light gray for the upper half, and painted black for the lower half. It looks good and really helps with excess wind and buffeting. I highly recommend Clearview Shields!

Rider is 6'Tall and has a 34" inseam

Just test rode with the new windshield, I love it.
I would estimate that there was an ~2" mild area above my helmet before the main force of the wind was felt, 70+mph etc., using my hand and slowly raising it starting at my face.
I even raised my body up, easily well over 2", and did not feel any wind force on my head that was at all annoying, just the normal amount of minor wind, not the main force. Which was actually kind of strange because that 14.5" windshield that I tested and returned seemed too low, I don't remember all the particulars but I returned it so obviously it didn't work for me.
I took a bunch of pictures in a much better area than in the garage, lol. I'm going to go through them really quick and crop or whatever is needed and I will send them to you.
I'm going to want another windshield similar for my other 2003 FXDWG. I've been running a Corbin Dual Tour seat on it for a while, and I also have a Corbin Gunfighter and Lady for it. On the two-tone bike I was just riding, I am running a Corbin Classic Solo that I had made specifically for me at a ride-in appointment in Hollister.
I just purchased another used classic solo seat, and I also have one on my 2003 FXDL Low Rider. One of those is going to go onto the Gunmetal Pearl 2003 bike, and I'm selling the heated dual tour seat that's on it. Once I get that seat figured out I'm going to want to get a shorter windshield from you because the one that's currently on it is OEM. (Pretty good chance that the seat currently on the FXDL is staying there since that one works really well with the short windshield that I purchased from you)
That OEM height on the one that was on this two-tone bike had the top edge right where I didn't want it, and then there was distortion when looking through the shield just below the top and it was right at the most important place for me to see, with my height in the saddle on that bike using that seat. SO much better now!
Best wishes, Jon

Rider is 6' tall with a 34" inseam

Just test rode with the new windshield, I love it.
I would estimate that there was an ~2" mild area above my helmet before the main force of the wind was felt, 70+mph etc., using my hand and slowly raising it starting at my face.
I even raised my body up, easily well over 2", and did not feel any wind force on my head that was at all annoying, just the normal amount of minor wind, not the main force. Which was actually kind of strange because that 14.5" windshield that I tested and returned seemed too low, I don't remember all the particulars but I returned it so obviously it didn't work for me.
I took a bunch of pictures in a much better area than in the garage, lol. I'm going to go through them really quick and crop or whatever is needed and I will send them to you.
I'm going to want another windshield similar for my other 2003 FXDWG. I've been running a Corbin Dual Tour seat on it for a while, and I also have a Corbin Gunfighter and Lady for it. On the two-tone bike I was just riding, I am running a Corbin Classic Solo that I had made specifically for me at a ride-in appointment in Hollister.
I just purchased another used classic solo seat, and I also have one on my 2003 FXDL Low Rider. One of those is going to go onto the Gunmetal Pearl 2003 bike, and I'm selling the heated dual tour seat that's on it. Once I get that seat figured out I'm going to want to get a shorter windshield from you because the one that's currently on it is OEM. (Pretty good chance that the seat currently on the FXDL is staying there since that one works really well with the short windshield that I purchased from you)
That OEM height on the one that was on this two-tone bike had the top edge right where I didn't want it, and then there was distortion when looking through the shield just below the top and it was right at the most important place for me to see, with my height in the saddle on that bike using that seat. SO much better now!
Best wishes, Jon

I have the medium height with medium grey tint with vent on a Lowrider ST El Diablo. At 5’ 7” I am looking over it most of the time. The wind just hits the top of my helmet at highway speeds. Behind the windshield my shirt has a tendency to float around in the low pressure area. The wind noise and buffeting is greatly reduced and allows more use of the audio system. The bike is definitely more comfortable with the additional height and width.
The tint is slightly lighter than stock ( good since it’s taller and I look through it more often).
The clarity is slightly cloudy compared to stock. Maybe its the tint or lack of coatings but its not bad. Again, I am looking over it most always.
The attachment hardware isn’t as fancy as the HD hardware but isn’t bad.
Clearview made what seemed like a long wait very bearable with good communication and updates. I was impressed.
Overall, I am pleased with the purchase. Its not absolute top quality but its not $500 -$1000 either.

This is my second Clearview Shield I've purchased for my bike. I liked my first one so much, I bought a second one a size larger. Not that there was anything wrong with my first shield, but I wanted a taller one for when it's colder, I have a passenger on the back, or when I'm taking long highway trips with my full face or modular helmet, just to eliminate any buffering at sustained highway speeds. I like that there is no distortion in the recurve, and that the shield doesn't flex and vibrate in the wind. If you're on the fence, just order it. It's worth it.

Ordered May 14th and a well packed windshield arrived June 20th. Was notified via email the production team was running behind. The included instructions are very detailed and the return/warranty policy seem good. I was on the fence between returning the Medium (17 1/2″ vertical) shield and ordering the Large (18 1/2″ vertical) shield. I wanted to essentially eliminate all turbulence. It's a motorcycle though so I don't think this is possible lol. The airstream seams to pass just above my head just touching my helmet. The view over the shield is very good. I think the Large would allow me to look over the shield to the horizon but just barely. I value the view more than reducing the noise by a negligible amount. Road about 600 miles through rain in the past couple days. I would not want to have to look through a wet visor and windshield at the same time. Also, sitting upright and leaning forward allows the air stream to blow the rain off my helmet visor. The 5 position vent does seem to help keep turbulence lower depending on the setting. There is a low pressure zone as I saw water droplets swirling around in the pocket of space between my chest and handlebars. Fit and finish is good aside from some hairline air bubbles on the black backing around the mounting holes. I don't care too much about that. I don't have the chrome strip since I am not the original owner. I used stainless washers to distribute the pressure from the mounting bolts. I like the look of it better too black into black. If you're similar to me 6' 32" Inseam don't get smaller than Medium for wind reduction. Taller than 6'? Large would probably work for you to look over comfortably. Take into account I ordered a recurve option (provides 1.5 – 2″ of lift to the airstream). My photo of the instrument cluster simulates about how far over the top of the shield I can see.

Works great! Fits perfect! Well made! Blocks wind very well! Completely happy with my purchase. Would buy again in a heartbeat!
Also came with hardware which is great!

This windshield rocks! I can't say enough about how happy I am with the new windshield and the service overall was fantastic. It fit great, looks great, and is high quality. I highly recommend this company for your windshield needs.

The 13" windshield fit perfectly on my 2000 Honda Interstate. I'm 5' 11" and I only feel slight buffeting as I near 80 mph. I appreciated the ability to test it with the wrapping on first, just in case I needed to send it back, but I didn't. Perfect fit. Happy customer.
Thank you!

Mounting was relatively easy. Except the hols on the top mount were slightly larger than the screw. The whole was not big enough to use the rubber washers with the inset to mount as per HD. I was able to find a sleeve small enough to fit and uses two washers instead of the one-piece rubber grommets as originally used with HD. Nice to see clean after 130,000 miles. The product looks great! Customer service was outstanding. I liked hearing how happy it made the representative/Owner that I was replacing one with so many miles on it. The lag time was not too bad. It was made in the USA.

Put New wind shield on my 2017 Tri Glide, 2 in. higher then stock. Fit perfect. The rain now goes over my head, instead of right to my face. Was in a hail storm, no marks at all. Great quality

windshield quality and clarity is very good.....Because of the increased size and curve of the screen took a little time to get it aligned with the OEM bracket holes...all in all very satisfied

I love the look of the stock shield on my 2023 LRST but it is horrible for wind protection. I'm 5.8 and it buffers right in my face. I do wear a bucket helmet. I went with the small because it 3 inches higher than the stock and now the wind hits right at my forehead which is fine,. I could go to the medium so it would clear my head but I don't want to take away the look of the bike. Even at 80 or 100 MPH it fine with a bucket helmet. I love the shield and the customer service was excellent. I ordered a small but changed my mind and aske for a medium but still got the small in the mail. I was human error but they called me and I'm ok with the small. Look great. great quality and price.