Yamaha V Star 950 | Windshield | V Star 1300 | Replacement

Clearview Motorcycle Windshields (2)

These Shields are Designed to Mount to the OEM Yamaha V-Star 1300 Brackets. Clearview Shields are designed as “replacement” windshields and we do not offer any brackets/braces/framing or any other hardware.

  • Our windshields are pre-drilled and pre-contoured to mount to your existing OEM setup.
  • 4 different heights available to tailor the shield height to your height
  • Added width for increased protection for your arms and shoulders
  • Allows rider controlled airflow to enhance comfort in warmer climates, and helps relieve back pressure, Adjusts in 5 different positions which controls angle of air flow around rider

Height (measured from the top of the headlight cutout to the top of the shield):

  • GT14 – 14″ L    ( 4″ Wider than stock)
  • GT16 – 16″ L    ( 4″ Wider than stock)
  • GT18 – 18″ L    ( 4″ Wider than stock)
  • GT20 – 20″ L   ( 4″ Wider than stock)

$184.00$306.00

  • Clearview Shields has been Handcrafting Motorcycle Windshields like the Yamaha V Star 950 & V Star 1300 Shields in the USA for over 36 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Materials Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash & Acc
  • .177 Thick Material is More Rigid than the Stock Shield
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • Clearview Shield are designed as “replacement” windscreens, WE DO NOT OFFER BRACKETS
v star 950

Looking for a Different Yamaha Windshield?

Yamaha Shields

motorcycle-windshield-subscribe-button

The Best Yamaha V Star 950 & V Star 1300 Windshields for your Ride

We engineer our Yamaha V Star 950 and V Star 1300 Replacement Windshields & all our Windscreens to exceed your expectations through rigorous testing. During the final stages of product development, we send out samples of our design to different riders for review and feedback to refine the finished product. These individuals are asked for their body height, inseam and Bike mods which gives us valuable data when determining Best windshield size for riders. This data is available to you to use for comparison for your own body size and specific riding needs. Click the link below for our focus group rider profiles to help you pic the best height.

Rider Windshield Profiles

Weight 13 lbs
Dimensions 32 × 8 × 28 in
Width

Height

, , ,

Color

,

Vent Options

,

17 reviews for Yamaha V Star 950 | Windshield | V Star 1300 | Replacement

  1. Joseph

    oldpaths7@rochester.rr.com

    I’m 5’8″. Bought a beautiful Yamaha v star 950 touring with stock windshield. Terrible wind buffeting. Did some research and put on lower fork shields, which helped about 60% but buffeting was still annoying over 50 MPH. Went with the 18″ clear shield with vent. Well, well! did that do the trick. Absolutely no more wind buffeting. I was originally hesitant about including the vent in my purchase, but man am I glad I got that. It was well worth it. I can adjust that slight breeze at my chest or right at my face. Concerning installation. 4 bolts gets the windshield off the bike to do the changeover on a towel on a table. Everything lined up perfectly. I am so happy with the purchase. If you are debating, pull the plug. You wont be disappointed.

  2. Andrew

    Very nice fabrication

    I was impressed with the precisely matched mounting holes and the cleancut smooth edges. First ratea

  3. Andrew

    Great replacement

    This is my 2nd windshield for a 950 from Clearview and I have to say they are always spot on.

  4. Rob

    A world of difference!

    I recently installed a Clearview Shield on my Yamaha V Star 1300 Tourer. The factory shield drove me crazy, too tall and bad buffeting. The Clearview Shield is just the right height, and buffeting is virtually gone. Once I added fork deflectors (Memphis Shades), the wind issue was PERFECT! Since then I added Cobra fatty highway bars, so I had to move the fork deflectors. A tiny amount of buffeting returned…so a trade off. Anyway, I can’t recommend this enough, buy a Clearview Shield. You won’t regret it. (Great quality. Easy install.)

  5. Dwaine

    Yamaha v star 1300.

    Great shield. Fits perfect and is my second shield from Clearview.

  6. Harold

    Yamaha VSTAR 1300 shield

    Very nice shield. Fits perfectly and provides excellent wind protection.

  7. Donnie

    donnie.carr@mail.com

    Great fit, thicker than the factory one. Easy to install. Would easily recommend Clearview for anyone looking for a new shield.

  8. Dan

    Very happy with windshield. Very easy to install.

  9. Dan

    I am very pleased with the windshield. It was very well packed and arrived in perfect condition. It fits my bike perfectly.
    Thank you.
    Dan Ryan

  10. Douglas

    perfect fit.. great job

  11. Ralph

    What a great experience. The Clearview sheild came packaged as to assure no damage. It fit exactly on my Yamaha bracket. The holes were perfectly placed. Only took a few minutes from package to mounted. Thanks

  12. Michael Z.

    Thumbs up during whole process!

  13. Michael Z.

    Thumbs up during whole process!

  14. Larry

    18″ Light Grey with Recurve

  15. Karl

    20″ Clear with Adjustable vent

  16. David

    Clear 20″ shield

  17. Brett

    20″ Light Grey w/RC

Add a review

Review your new Clearview Shield

You may also like…

Accessories/Cleaning Kits

Novus Polish Mates 6 pack

$9.00