Honda ST1300 Replacement Windshield

Clearview Shields customizes every shield we make. Review the details for each option and Build your new Screen.

Remember this is your shield, Crafted to meet your needs by our experienced Fabrication Technicians so your satisfaction and enjoyment of our Windshield is our #1 Goal.

The Honda ST1300 Windshield has a Contoured Shape for Improved Air Flow & Shield strength.

Height: 

  • GT Small – 19.5″ L  (1″ vertically higher)
  • GT Medium – 21.5″ L  (2″ vertically higher)
  • GT Large – 23″ L  (3″ vertically higher)

Please note:

  • The maroon-colored bike pictured has the PRV vent liners installed on the shield. These vent liners are not included in the standard shield price. They can be purchased separately. Order PRV vent liners here
  • The vent options are either/or. We can not manufacture a shield with both the PRV and the Adjustable Vent.

$145.00$262.00

Clear
SKU: HON-ST13 Categories: ,
  • Clearview Shields has been Handcrafting Shields in the USA for Over 33 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash & Acc
  • .177 Thick Material is More Rigid than the Stock Shield
  • Ready to Mount for Fast & Easy Installation
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed and is Safe to use Rain-X Original Clear Formula
Weight9 lbs
Dimensions30 × 24 × 7 in
Width

Height

, ,

Color

,

Vent Options

, ,

43 reviews for Honda ST1300 Replacement Windshield

  1. Christophe and Silvie

    Impression with a test ride of 2500 km (1000 of highway).

  2. Dick and Luci

    Thanks for all the GREAT work that you did for Luci and me yesterday. Your warm customer service was very much appreciated.

  3. Sonny

    1st. the shield did not need to be raised more than about 2/3rds of its top available height to stop wind buffeting for the passenger. 2nd. in that position it also removed most of the passenger shoulder wind buffeting. 3rd. it is an extremely quiet environment for the rider and also quietens it for the passenger(especially around helmet). 4th. also with the shield in its lowest position I can still see over the top ( 5ft 8in 30in inseam) seat in the lowest position 5th. as the shield height is raised you pick up a slight wind noise through approximately 1 inch of movement somewhere about in the 1st 3 inches of upward movement(never use it in that position). 6th. rider doesn’t feel any back pressure; passenger gets a slight upward draft on her back. 7th. Arms and chest of passenger had reduced pressure. 8th. on some truck passing the shield had to lowered some to prevent some turbulence. 9th. before you mount the new touring model you will be able to see what looks like some distortion around the new larger sections however when I ride I do NOT see those at any time.

  4. David

    I was extremely impressed with the Clearview shield that I received as far the wind protection and the reduction in noise. There is also NO helmet buffeting. I want to tell you that this IS an awesome wind shield. I’ve already recommended it to a good friend.

  5. Jeff

    I bought my Clearview GT Large with cat eye vents a few weeks ago, and am very impressed with it. I ordered it directly and he answered all my questions on the phone. I told him I wanted good coverage from the cold wind in the morning, and wanted the breeze off my arms and shoulders. All the GT shields are 3 inches wider, but when I asked about a 4 or 5 inch,

  6. Howard

    I took the ST1300 out on the freeway and drove 10 miles; 70 mph for 5 miles, turned around and 80 mph for 5 miles back. I purchased the Clearview windshield because I wanted to get the wind off my biceps when it is COLD outside, it did that. The Clearview shield is wider than the OEM shield; it did just what I had hoped for. I felt a very small amount of wind under my arm, no windshield is going to take care of that unless it covers the mirrors completely (can you say UGLY…if it went over the mirrors). When it is cool outside, I would normally drive so as I can see over the shield. If my wife is with me, however, I will run the shield up. Now she will have even more wind protection from not only the added height, but also the width as well.

  7. Scott

    I just returned from a four day, 2100 mile tour on my ST1300 behind the new GT Medium shield. What an improvement! I had just about given up after trying the stock, Cee Bailey, and Cal Sci shields, but this one from you has finally solved the wind noise and head buffeting problems. The lip at the top allows me to run it much lower and still get the protection I need, even in the rain in Washington!

  8. Marty

    I purchased the Clearview shield for my 2003 Honda ST1300, because the stock shield was causing so much buffeting that it created a lot of neck and upper sholder fatuge especily at interstate speeds.

  9. Ryan

    Medium, Clear with PRV vents

  10. Rich

    Here comes my 20 mile review. Fit and finish excellent. Shape/size looks nice with the lines of the bike.

  11. Jay

    Here are the pictures of the new shield on the bike as I promised. I think it looks great, and I think it’s going to work out perfectly.

  12. Don

    I bought a ST1300 Large Light grey windshield from you back in May. Having had it in use for 6 months now, I can say that I am totally satisfied with my Clearview Windshield! As a 6’6″ tall rider, it was exactly what I needed to give me the protection I was looking for.. I highly recommend Your product to anyone regardless of their height… I’ve cleaned it many ,many times since May and it is still scratch free! Doing business with you was a great experience, from the consultation, sales process, manufacturing and delivery.

  13. Bob

    I’ve tried 2 other aftermarket shields and you have them beat by a long shot.

  14. Chuck

    Shield is working out just great. As I said when I visited your shop in Nov. I would not have any other shield on my bike. Clearview Small tinted, ST1300 with cat eyes. Attached is a picture of my bike, “Silverstorm”

  15. Brian

    Got the windshield….took it for a spin….no howling….and great protection. It was a short ride as you have certainly heard about our weather here…..but I think I am going to love it come summer time !!

  16. Leo

    Clear Large with PRV vents

  17. Charles

    Medium Light Grey w/PRV vents

  18. Jack

    Medium – Light Grey – 5 Position Vent – clean kit. All puchased in 2013.

  19. Chip

    I purchased this shield after a considerable amount of research. In addition, I got a great end of the year price. This shield almost entirely eliminates all buffeting and wind noise even when all the way down. Raise it 1 inch and all you hear is engine. I have the vent and am very glad I got it. It offers a significant amount of air through and is big help. The extra width is perfect for keeping the cold wind off my shoulders and arms.

  20. brachotte

    La bulle est invisible, superbe, la protection est parfaite, la passagère est bien protégée. Bulle haute sur l’autoroute et le bruit est bien atténué! SUPER

  21. Henry in Sweden

    Bought the small sized windshield to my Honda ST1300. The extra wide size in the top and the shape make it quieter and I do not need to raise the window much. I always look over the windshield and can go on highways with open .

  22. Henry in Sweden

    Bought the small sized windshield to my Honda ST1300. The extra wide size in the top and the shape make it quieter and I do not need to raise the window much. I always look over the windshield and can go on highways with open .

  23. brachotte

    La bulle est invisible, superbe, la protection est parfaite, la passagère est bien protégée. Bulle haute sur l’autoroute et le bruit est bien atténué! SUPER

  24. Chip

    I purchased this shield after a considerable amount of research. In addition, I got a great end of the year price. This shield almost entirely eliminates all buffeting and wind noise even when all the way down. Raise it 1 inch and all you hear is engine. I have the vent and am very glad I got it. It offers a significant amount of air through and is big help. The extra width is perfect for keeping the cold wind off my shoulders and arms.

  25. Jack

    Medium – Light Grey – 5 Position Vent – clean kit. All puchased in 2013.

  26. Charles

    Medium Light Grey w/PRV vents

  27. Leo

    Clear Large with PRV vents

  28. Brian

    Got the windshield….took it for a spin….no howling….and great protection. It was a short ride as you have certainly heard about our weather here…..but I think I am going to love it come summer time !!

  29. Chuck

    Shield is working out just great. As I said when I visited your shop in Nov. I would not have any other shield on my bike. Clearview Small tinted, ST1300 with cat eyes. Attached is a picture of my bike, “Silverstorm”

  30. Bob

    I’ve tried 2 other aftermarket shields and you have them beat by a long shot.

  31. Don

    I bought a ST1300 Large Light grey windshield from you back in May. Having had it in use for 6 months now, I can say that I am totally satisfied with my Clearview Windshield! As a 6’6″ tall rider, it was exactly what I needed to give me the protection I was looking for.. I highly recommend Your product to anyone regardless of their height… I’ve cleaned it many ,many times since May and it is still scratch free! Doing business with you was a great experience, from the consultation, sales process, manufacturing and delivery.

  32. Andre’

    Here are some pics of my Honda ST1300A with the Clearview replacement shield. It’s the “HON-S30S ST1300 GT SMALL” model, with the two PRV slots. It is a miracle for me and especially for my wife as a passenger.

  33. Jay

    Here are the pictures of the new shield on the bike as I promised. I think it looks great, and I think it’s going to work out perfectly.

  34. Rich

    Here comes my 20 mile review. Fit and finish excellent. Shape/size looks nice with the lines of the bike.

  35. Ryan

    Medium, Clear with PRV vents

  36. Marty

    I purchased the Clearview shield for my 2003 Honda ST1300, because the stock shield was causing so much buffeting that it created a lot of neck and upper sholder fatuge especily at interstate speeds.

  37. Scott

    I just returned from a four day, 2100 mile tour on my ST1300 behind the new GT Medium shield. What an improvement! I had just about given up after trying the stock, Cee Bailey, and Cal Sci shields, but this one from you has finally solved the wind noise and head buffeting problems. The lip at the top allows me to run it much lower and still get the protection I need, even in the rain in Washington!

  38. Howard

    I took the ST1300 out on the freeway and drove 10 miles; 70 mph for 5 miles, turned around and 80 mph for 5 miles back. I purchased the Clearview windshield because I wanted to get the wind off my biceps when it is COLD outside, it did that. The Clearview shield is wider than the OEM shield; it did just what I had hoped for. I felt a very small amount of wind under my arm, no windshield is going to take care of that unless it covers the mirrors completely (can you say UGLY…if it went over the mirrors). When it is cool outside, I would normally drive so as I can see over the shield. If my wife is with me, however, I will run the shield up. Now she will have even more wind protection from not only the added height, but also the width as well.

  39. Jeff

    I bought my Clearview GT Large with cat eye vents a few weeks ago, and am very impressed with it. I ordered it directly and he answered all my questions on the phone. I told him I wanted good coverage from the cold wind in the morning, and wanted the breeze off my arms and shoulders. All the GT shields are 3 inches wider, but when I asked about a 4 or 5 inch,

  40. David

    I was extremely impressed with the Clearview shield that I received as far the wind protection and the reduction in noise. There is also NO helmet buffeting. I want to tell you that this IS an awesome wind shield. I’ve already recommended it to a good friend.

  41. Sonny

    1st. the shield did not need to be raised more than about 2/3rds of its top available height to stop wind buffeting for the passenger. 2nd. in that position it also removed most of the passenger shoulder wind buffeting. 3rd. it is an extremely quiet environment for the rider and also quietens it for the passenger(especially around helmet). 4th. also with the shield in its lowest position I can still see over the top ( 5ft 8in 30in inseam) seat in the lowest position 5th. as the shield height is raised you pick up a slight wind noise through approximately 1 inch of movement somewhere about in the 1st 3 inches of upward movement(never use it in that position). 6th. rider doesn’t feel any back pressure; passenger gets a slight upward draft on her back. 7th. Arms and chest of passenger had reduced pressure. 8th. on some truck passing the shield had to lowered some to prevent some turbulence. 9th. before you mount the new touring model you will be able to see what looks like some distortion around the new larger sections however when I ride I do NOT see those at any time.

  42. Dick and Luci

    Thanks for all the GREAT work that you did for Luci and me yesterday. Your warm customer service was very much appreciated.

  43. Christophe and Silvie

    Impression with a test ride of 2500 km (1000 of highway).

Add a review

You may also like…

Accessories/Cleaning Kits

Novus Polish Mates 6 pack

$8.00