Phone: 800-798-6089

Road King Screaming Eagle (7 Holes across horizontal crossbar)

5 out of 5 based on 15 customer ratings
(15 customer reviews)


Road King Screaming Eagle (7 Hole Pattern) Shields are Designed to Mount to the OEM Harley Brackets #’s 57353-07, 58799-02, 58163-02    (we do not offer any brackets) 6 Different Heights Available to Tailor the Shield Height to Your Height Upper Recurve Pushes the Air Up Higher Creating a Larger, Quieter Pocket Nylon Collars to Insulate Screws and Help Protect from Over Tightening


SKU: HAR-RKSE. Categories: , .

Choose Recurve Options

For more information about recurves click here

No Recurve
Upper Recurve

• Pushes the Airflow 1.5" - 2" Higher • Creates a Better Pocket with a Shorter Shield • Makes the Shield More Rigid • Adds a Nice Look to the Shield

Choose Vent Options

For more information about vents click here

5 Position Adjustable Vent

allows rider controlled airflow to enhance comfort in warmer climates, and helps relieve back pressure, adjusts in 5 different positions

No Vents

Choose Color

Dark Grey only available in 15" and 17" heights

Allows 96% of the light to transmit through the screen.

Dark Grey

  Allows 17% of the light to transmit through the screen. Recommended only for the shields you're looking over.  

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Height

How to choose the correct height shield


15" L
17" L
18.5" L
Stock 19.5" L
  22" L
Measurement Location:
    • Length is measured in the center of the shield from the top of the headlight cutout to the top of the shield
15 Inches
17 Inches
18.5 Inches
19.5 Inches
22 Inches

Choose Width

We can make custom shields with the additional width upon request.  Please contact us for details.

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 31 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount to your OEM Brackets (we do not offer any brackets)
  • 6 Different Heights Available to Tailor the Shield Height to Your Height
  • Upper Recurve Pushes the Air Up Higher Creating a Larger, Quieter Pocket
  • Nylon Collars to Insulate Screws and Help Protect from Over Tightening
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • Dark Grey only available in 15″ and 17″ heights
  •  These Shields are Designed to Mount to the OEM Harley Brackets.
  • (we do not offer any brackets)
  • Fits model #’s 57353-07, 58799-02, 58163-02
  • All shields will be manufactured and shipped WITH THE RECURVE option unless you select “NO RECURVE”
  • “*** PLEASE NOTE: THESE SHIELDS WILL NOT FIT THE 2013 CVO Road King Brackets ***

Additional Information

Recurve Options

No Recurve, Upper Recurve

Vent Options

5 Position Adjustable Vent, No Vents


Clear, Dark Grey, Light Gray


15 Inches, 17 Inches, 18.5 Inches, 19.5 Inches, 22 Inches



15 reviews for Road King Screaming Eagle (7 Holes across horizontal crossbar)

  1. Reid
    5 out of 5


    Clear 18.5″ w/Recurve

    Dear Clearview,

    My 18.5” Clearview shield with re-curve is the best windshield I have purchased to date. I have tried four other brands in the last two years for my 2011 Road King Classic and none of them have satisfied me. The Clearview shield exudes quality and elegance that is deserving of my $37k customized RKC. The edges are perfectly cut and smoothed. The tint and clarity is crystal clear. The email notifications indicating the progress and stages of completion was a nice touch. The windshield arrived without a blemish and was packaged extremely well. The mounting and care instructions were very well laid out and easy to understand. The test drive was great. The 18.5” shield was perfect for my 5’8” height to see easily over the top and the re-curve directed the wind well above my head. Overall, the windshield made a significant contribution to the appearance and functionality of my motorcycle.

    Ft. Lauderdale, FL

  2. Bob
    5 out of 5


    24″ Clear w/recurve

    With the police seat on my FLHP I was getting too much in the wind for a long cruise even with a 24 inch shield. After a good deal of research I ordered the 24 recurve from Clearview. I just returned from a 3000 mile ride and the shield was perfect, directing most of the air over my head. It did take quite a while, so you should plan ahead… but the quality of this windshield is well worth the wait.


    Prescott, AZ

  3. David
    5 out of 5


    18.5″ light grey with recurve and adj. vent

    I’m following up with several photos on my RK with the Clearview shield…

    I think it’s important to understand why I purchased the Clearview shield for my 2012 Road King. Quite simply, customer service. Questions were responded to quickly and accurately.

    The web site was helpful in assisting me in finally choosing a height that worked for me. I’ve just installed my light smoke, 18.5” shield with vent and could not be more pleased. It arrived well packaged and protected. It is thicker than the two previous shields I had.

    On the first ride, several folks came over to check out the vent, and then commented on the overall quality of the shield. For me, this was money well spent. Thanks for a great product.

    Tomball, TX

  4. Tom
    5 out of 5


    18.5″ Light Grey with Recurve and Adj. vent

    Thank you for the new shield, I love it! It is such a great improvement over the stock shield. I feel like for the first time, I am able to enjoy the bike!

    Westfield, Indiana

  5. Steve
    5 out of 5


    Clear Stock size with recurve.

    Great review on our Road King shield in a bug storm!

    I recently installed a standard height recurve on my 98 Road King. I am 6′ tall. The windshield comes about to my chin I guess.

    Last night I rode 118 miles after dark through the Central Valley of CA. Farming everywhere and bugs like I have never seen before. Sometimes like snow in my headlight. Here’s a few pics of the windshield totally covered with bugs.

    Now for the reason I am sending this note: I did not get ONE bug on my glasses and only very few on my helmet. Unbelievable !

    Great product! Thanks.

  6. Carl
    5 out of 5


    22″ Road King Light Grey

    Well, I have to say that I am very impressed with this Clearview Windshield. I purchased the 22″ tour, light gray tint with recurve for my 2005 Road King. I am 6′ 2″ tall which means every nasty piece of dirt ,dust, grime, bug and rain was a constant peppering of my face with the standard windshield. (I may not be the prettiest man on this planet, but this wasn’t helping matters.) The new Clearview Windshield reduced the turbulence on the front forks and absolutely no debris got past it. In a normal riding position, I am looking through the top 1 1/2 inches of the shield. All I need to do is straighten my back slightly to see over the top. The recurve directs the wind about 5″ or so over my helmet. It probably wasn’t necessary for wind deflection, but as a mechanic, it is obvious that this adds an immense amount of rigidity as the windshield never flexed, even at 100. The gray tint added a nice elegance to a mostly black and chrome bike. If I were to condense this review down to one word, that word would be PERFECT.

    Thanks for the super service.

    Carl, Linden Michigan

  7. Brian
    5 out of 5


    Clear 22″ with recurve


    The shield is awesome!! The buffeting I was getting is very much reduced and the shield looks great!! Very happy on this end.

    Here are a few pics!!

    thanks again!
    Lake in the hills, IL

  8. Louis
    5 out of 5


    Clear, Stock Height with Recurve

    Hey guys, just letting you know everything you said about your windshields was ” ABSOLUTELY ” true!

    This is one of the best products I have bought for my RoadKing.

    The service I received from the time I ordered it till it hit my door was fantastic, DON’T CHANGE A THING!!

    Kountze, TX

  9. Randy
    5 out of 5


    17″ Light Grey with Recurve

    Mark, thank you. I just received the 17inch re-curve tinted shield. Fit and finish are excellent.

    After a quick road test I was surprised that the new shield gives as much wind protection as the stock 20 inch but now I can see over the top.

    Thanks again,

    Hutchinson, KS

  10. Tim
    5 out of 5


    I received and installed my new shield today and wanted to let you know how pleased I am with it. I got the 2.5 shorter clear (with recurve) model for my 06 Road King Classic. Very easy to install, really like the extra rigidity so it doesn’t shake at idle like the stock unit, and I’ve found that at highway speeds, the main air stream runs about 4-5 inches above my head, while leaving plenty of vision space over the top of the shield, about nose level.
    Great Product at a great price and I’m a happy rider!!! Big test starts tomorrow….heading to Sturgis!

    Thanks Again,
    West Des Moines, IA

  11. Reggie
    5 out of 5


    Light Grey 19.5″ with recurve

    The experience has been very pleasing overall. Feedback through the manufacturing process was precise and informative. The shield shipped within the time frame given. The shield arrived without any damage. I have the shield installed and ready to go. I have not been able to ride with it yet to check how the flip manages the air flow around the shield.

    Thanks for the prompt build and shipping of my shield. This is my 3rd Clearview shield, so the extra customer service you give is kind of taken for granted now.

    Cleveland, MS

  12. Rich
    5 out of 5


    Light Grey 17″ w/Recurve

    I first want to thank you on getting the windshield out to me so quickly and it arrive on the day you said it would. I own a 2005 HD Custom Roadking which i had a 22 inches windshield.

    The 17 inch lightly tint is a perfect fit for me at 5\’8\” inch tall. I can see the road like i have no windshield but do not feel the wind striking my face even at 85 miles an hour. Plus it is just as quiet as my large windshield which I had to look through. To see if the recurve was working i raise my arm nearly 3 inches above my helmet to finally feel the wind which nearly rip my arm off. I am sold on your windshield and now I will be able see the road when it is raining which was very dangerous a few times this year. And the lightly tint does help on the glare.

    I hope you use this review since I rarely ever write one.

    Rich. St.Louis Missouri

  13. Garry
    5 out of 5


    18.5″ Light Grey with Recurve

    Hi Mark,

    Went out of town a couple of weekends and finally got the windshield on Feb. 19th Sat.
    I took the bike out for a ride and the windshield is just the right height and very stable.

    I get no buffeting at the face or helmet. I am
    very happy with it. It looks good with the Road King Classic. I will take some pictures real soon and you can put one on your web-site.

    Anyhow thanks for everything and I will send the photos real soon.

    Looks real good with the Smokey Gold Pearl Metallic.

    Locust, NC

  14. Howard
    5 out of 5


    I just wanted you to know how happy I am with a windshild I purchased from you 3 years ago. I know I was a real pain with all my questions and custom spesifications, but you didn’t seem to mind at all. You produced a product that far exceeded my expectations. Long distance riding on my 06 Road King is a much more pleasant experience behind the recurve shield you produced to my specifications. Thanks again for your patience and the excellent shield that still looks brand new after 30,000+ miles.

    Birmingham, AL

  15. Charles and Maggie
    5 out of 5


    Road King Stock Clear with Recurve

    You guys rock, thanks for expediting my order and getting us our windshield in time. ! We are heading out first thing in the morning.

    The windshield looks and works great and I have already been singing your praises to everyone that will listen.

    Thanks again,
    Charles and Maggie
    Mesa, AZ

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886