BMW R90S and R100S Windshield
- Clearview Shields offers our R90S and R100S Shields ready to mount for fast & easy installation
- 2 different heights available to tailor the shield height to your height
- Contoured shape for improved air flow & shield strength
- Upper recurve pushes the air up higher creating a larger, quieter pocket
Height (length is measured in the center of the shield from top to bottom):
- 12.5″L (stock)
- 16.5″ L (5″ longer than stock)
Width:
- 3″ extra width not available in 12.5″L
- 3″ extra width is standard on the 16.5″L
Tints
Tints
Clearview Shields Offers a wide selection of Tints to enhance the look of your new Motorcycle Windshield. Learn More
- Clearview Shields has been Handcrafting Motorcycle Windshields like the BMW R90S & R100S in the USA for Over 36 Years
- Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
- Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
- UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc
- .157 Thick Material is More Rigid than the Stock Shield
- Ready to Mount for Fast & Easy Installation
- Shipped with a Protective Film that allows Installation and Testing
- Can be polished, Buffed and is Sate to use Rain-X Original Clear Formula
The Best BMW R90S and R100S Windshields for your Ride
We engineered our BMW R90S & R100S windshields to exceed your expectations through rigorous testing. During the final stages of product development, we send out samples of our design to different riders for review and feedback to refine the finished product. These individuals are asked for their body height, inseam and Bike mods which gives us valuable data when determining Best windshield size for riders. This data is available to you to use for comparison for your own body size and specific riding needs. Click the link below for our focus group rider profiles to help you pic the best height.
| Weight | 7 lbs |
|---|---|
| Dimensions | 20 × 20 × 10 in |
| Color | |
| Height | |
| Width |
12 reviews for BMW R90S and R100S Windshield
Add a review
You may also like…
Accessories/Cleaning Kits
Accessories/Cleaning Kits
Related products
BMW Motorcycle Windshields
BMW Motorcycle Windshields
BMW R100RS | Windshield Replacement | Aftermarket Windscreen
BMW Motorcycle Windshields
BMW Motorcycle Windshields
BMW Motorcycle Windshields
BMW Motorcycle Windshields
william –
Ordered a R90S windscreen. Very High quality windscreen at a reasonable price. Packaging was A1. Will purchase again. Thanks Bill
Mark –
I ordered the standard height medium dark windscreen for my BMW S fairing. I was replacing a stock BMW windscreen, so I was able to make direct comparisons. The good news is the Clearview screen is well made, with little distortion and a good fit if you use the stock BMW fasteners (I couldn’t get the Clearview-supplied washers to work). The less good news is the Clearview screen has a smaller-than-stock ‘lip’ below the mounting holes, so BMW’s rubber O ring material can’t be used to cushion the screen from the fairing. I suspect this will cause fairing wear over time from vibration.
The additional news is that Clearview doesn’t seem to read the comments field on the online order form. At least they didn’t read mine because I had to separately request special shipping instructions.
Eric –
Looks great installed on the 74 BMW R90S. Fit was good, easy install. I did not have the original shield but I have seen pictures and it looks correct. Nice job. Would buy again if the need arises.
Eric –
I love the dark grey tint, the clarity, and the finish. But the drilling was off for my stock 1977 BMW R100S fairing. I ended up ditching the supplied shouldered washers and doing a little judicious filing of several mounting holes. After this, it mounted fine with the supplied bolts and some flat plastic washers I sourced elsewhere. I discussed my experience with someone in the production department, so this difficulty may end up being corrected in future screens shipped for the R90S/R100S stock BMW cafe fairing.
JEAN GUY and CHRISTINE –
Firstly, Clearview had the respect to notify me that there would be a small delay with delivery date. You showed that yr company values its customers. Thank you for that. The product arrived with no damage and in a timely manner . The product itself fit perfectly with no fuss, onto my 1987 R80. I found the quality to be exceptional and pleasantly surprised at how robust the material is. I tried it out right away and I’m happy with my choice. Wind noise is down and no more ‘buffeting’ that resulted from the original windscreen. All in all I’m very pleased and would recommend Clearview to anyone.
Wayne –
Attached is a picture of my ’77 BMW R100S with the new windshield. Please tell your staff of fabricators that I am thoroughly pleased with the fit and finish of the shield. I have been wrenching on antique vehicles since I was a teenager. I fully expected to have to “fit” the shield to the bike. Not the case here. I am a retired machinist/fabricator. I know a quality product when I see one.
Thanks,
Wayne
Latrobe, PA
Doyle Smith –
The screen looks perfect however I haven’t installed it yet. Still getting the bike together.
Hillard –
The windshield came today and looks awesome. Thank you so much for your great customer service. -Hill
DuWayne –
It was exactly what I was hoping it would be. Great engineering, and Great looking product. I am very please.
Chuck –
BMW 12.5″. Smoke stock size
Taylor –
BMW 12.5″ Dark Grey Stock Size
Don –
BMW 12.5″ Smoke