Harley-Davidson | FXRP 1984 Newer & FXRT 1983-85 | Motorcycle Windshields
Clearview Shields Harley-Davidson FXRP & FXRT Motorcycle Windshields
Both the FXRP & FXRT Replacement Windscreens are Contoured, Pre-Drilled Ready to Mount for Fast & Easy Installation.
- Mounting hardware included with all replacement screens
- Choose from 2 different side cut styles
- Multiple lower black masking options cover lower dash area for a clean, finished look
- 8 different heights available to tailor the shield height to your height
- Dark gray tint only available on 8″, 11″, AND 14″ heights
Tints: There are three color selections for Tints to enhance the look of these motorcycle windshields – clear, light gray and dark gray. ( Dark Grey only available on the 8″, 11″, 14″ and 16″)
Height: measured in the center of the shield from top to bottom.
Harley FXR Mount:
- High impact strength plastic allows No structural worries for fewer mounting points even at high speeds.
- 4 point option available on 8″, 11″, 14″ and 16″ heights
Harley FXR Side Cut:
- Measurements taken while screen is siting on a flat surface.
- 5″ reference point is taken from that flat surface upward at the outer mount hole.
- Custom cuts are also available
Vent Options: Vent Option only available for heights 14″ and up
Masking Style
$125.00 – $310.00
- Mounting hardware included with all replacement screens
- Premium High Impact Acrylic Blend Material Exceeds Industry & DOT standards
- UV Inhibitors Extend Shield Life & Provide Protection for the Dash & Acc
- .157″ Thick Material is More Rigid than Stock Shield
- Lower Black Masking Covers Lower Dash Area for a Clean, Finished Look
- Shipped with a Protective Film that allows installation and testing
- Every Screen comes with a full Manufacturers Warranty
Harley-Davidson FXRP & FXRT Windshield by Clearview Shields
We engineer our Harley-Davidson FXRP & FXRP Windshields and Motorcycle windscreens to exceed your expectations through rigorous testing. During the final stages of product development, we send out samples of our designs to different riders for review and feedback to refine the finished product. These individuals are asked for their body height, inseam, and any existing Bike mods/modifications. This information gives us valuable data when determining best shield size for each individual rider. This data is available to you to use for comparison for your own body size and riding needs. Click the link below for our focus group rider profiles to help you pick the best height.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Height | 11 Inches, 14 Inches, 16 Inches, 18 Inches, 19 Inches, 22 Inches, 23 Inches, 8 Inches |
| Color | |
| Recurve | |
| Harley FXR Windshield side cut style | |
| Harley FXR Windshield Masking | HD FXRP screen mask P, HD FXRP screen mask strip, No Masking |
| Vent Options |
17 reviews for Harley-Davidson | FXRP 1984 Newer & FXRT 1983-85 | Motorcycle Windshields
Add a review
You may also like…
Accessories/Cleaning Kits
Related products
Harley Davidson Motorcycle Windshields
Harley Davidson | Sidecar RLE with 7 Hole Mount | Replacement Windshield
Harley Davidson Motorcycle Windshields
Harley-Davidson | Heritage/Fat Boy Windshield 1977-1993 | Fits HD Non Detachable
Harley Davidson Motorcycle Windshields
Road Glide Windshield 2015-Present | Harley-Davidson® Windshields
Harley Davidson Motorcycle Windshields
Harley-Davidson | Deuce Windshield | Fits HD Detachable Compact Brackets
Harley Davidson Motorcycle Windshields
Harley Davidson Heritage Springer Replacement Windshield fits HD Detachable King Size Brackets
Harley Davidson Motorcycle Windshields
Harley Road King Detachable Wind Deflector (7 Holes across horizontal crossbar)
Toru –
Strong and high quality!
Milan –
This review is of a 14″, dark grey FXRT shield with a recurve, FXRP screen/mask and bar cut. I bought it to replace a 9″ shield from another manufacturer. Fit is great. Packing was excellent. It came with new well nuts and bolts. The bar cut is just right. I have 8″ risers and 4″ bars. It clears everything. The old shield caught my throttle cable on full lock. If something happened to it, I’d buy the same shield again.
BRENT –
Bought the 16″ recurve, bar end. Surprised that the “recurve” was not very curved, (not like the pictures on the web site) But seems to detour the wind well.
Installed it on an aftermarket” Defiant” FXRT repro fairing. Since nothing else has fit on this aftermarket fairing, I was not that hopeful this one would fit. Surprise… fit perfectly.
After installing it, I could have gotten away with a slightly higher, and straight cut. Only regret was not being able to get the FXRT silver band sticker on the bottom of the windshield, Too much dust /dirt gets down there, and cannot clean it without taking off the windshield.
Good quality product, don’t expect the tracking number from Clearview to track your windshield; mine tracked someone’s COVID test kits!!!
Took 3.5 weeks to arrive, after they “confirmed” my order ( which took 2 weeks post payment), so be prepared to wait 6+ weeks for delivery in Canada.
I’d buy from them again. The windshield is worth the money!
Craig Stenger –
Thank you for your review Brent. Shipping to Canada has been a challenge using either USPS or the expensive UPS. I am glad it all worked to your satisfaction though in the end.
Tanner –
This windshield is great. I got the 14” Vented option for my FXRT swapped 2019 Street Bob. It works perfect for me and the vent is really great to have.
Anthony –
Great quality, awesome customer service!! Well done guys! Thanks
Rick –
I like it , it works great
Scott –
I purchased this for my FXDP, Dyna -Police Defender. I put a Repop FXRP fairing on to make it look like it SHOULD have from the factory. I have the original sprung seat, which gives a very tall ride height requiring a tall windshield.
The Clearview shield (22”) gives me perfect coverage and perfect fit, high-quality, great fasteners, I have 100% no complaints and I’m absolutely thrilled!
The cut outs worked great to keep my handlebars and mirrors from touching the windshield. Everything was PERFECT.
I could not recommend them more!
Mike –
Great shield , perfect fit on my 92RP !!!
Cowboy –
I recently put an FXRP fairing on my bike and looked at windshields from Clearview and Klockworks. Not an easy decision but after receiving feedback from the FXR community I chose the 14” with Recurve, grey tint and their P Mask. I am very pleased with my selection. The shield fits perfectly, looks great and is surprisingly heavier/thicker than expected. Much thicker than anything ever offered by Harley.
Grant –
I haven’t got to install it yet onto my bike but the product quality is great and the company itself it’s great they called me immediately when they thought there was going to be a issue to cause my windshield to be late and it was still on time great company wish other companies customer service was like clearview
Buzz –
Perfect fit,size,hardware included..and customer service is top notch. Will definitely do business again with Clearview
Rob –
I went with the 14” without ventilation and I’m really satisfied with the shield! I followed “ Choosing Your Shield Height” tips and it was brilliant. No more air in my face and no buffeting! I’m 175cm.
Good product!
Gary –
What do I think about this screen?
I think that I love it as much as I love the other two screens I have from Clearview.
That’s right. I own three.
They are quality made, priced right.
Depending on my planned ride, I have options on not only the look but how much ventilation I want or need.
Worked with the staff and it was easy as butter.
Enjoy your new Clearview screen (or two).
Drew –
Got glass. Couldn’t be happier! Thanks again!
BRENT –
Perfect fit, very clear and nice. Wish i would have gone a bit taller, I am 5’8 and the wind buffers right in my eyes. My fault though.
onekodeone –
Fire ,fits flush and clean, heavy thick solid shield recommend this for wind and the elements if you have FXR or want the police style wind shield
Derek –
Love My Shield
Jd Customs Custom side cut 16″ Light Gray with Recurve