Moto Guzzi | Touring Fairing EV, Stone Motorcycle Windshields
These Moto Guzzi Touring Fairing Windshields are offered in 2 different heights to tailor the shield to your height needs. Ready to mount for fast & easy installation
Length (measured in the center of the shield from top to bottom including the portion of the shield below the fairing):
- Stock – 18″L
- GT22 – 21.5″
Width:
- Stock – 20.5″
- GT22 – 21.5″ (1″ Added width for increased side protection)
Price range: $190.00 through $215.00
- Clearview Shields has been Handcrafting Motorcycle Windshields like the Moto Guzzi Touring Shields in the USA for over 33 Years
- Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
- Premium High Impact Acrylic Blend Materials Exceeds Industry & DOT Standards
- UV Inhibitors Extend Shield Life & Provide Protection for the Dash & Acc
- .177 Thick Material is More Rigid than the Stock Shield
- Shipped with a Protective Film that allows Installation and Testing
- Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
- Clearview Shield are designed as “replacement” windscreens, WE DO NOT OFFER BRACKETS
The Best Moto Guzzi Touring Windshields for your Ride
We engineer our Moto Guzzi Touring Fairing EV, & Stone Replacement Windshields to exceed your expectations through rigorous testing. During the final stages of product development, we send out samples of our design to different riders for review and feedback to refine the finished product. These individuals are asked for their body height, inseam and Bike mods which gives us valuable data when determining Best windshield size for riders. This data is available to you to use for comparison for your own body size and specific riding needs. Click the link below for our focus group rider profiles to help you pic the best height.
3 reviews for Moto Guzzi | Touring Fairing EV, Stone Motorcycle Windshields
Add a review
Galen –
I installed this CLEAR fairing on a 2024 Moto Guzzi V7 STONE 850 model 10 using the OEM bullet fairing OEM hardware. It fits perfectly and is super solid and stable. The quality is top notch. I ordered a 17.5″ height above the top of the headlight to the top of the fairing for my 5’10” frame with 32″ inseam for reference. I look OVER a shield so it is about as tall as it can be and allow a clean sight-line over the shield’s top edge. I had a shorter and narrower shield and wanted to get rid of the added wind “deflector” on top. I still like a CLEAR fairing for an in-close sight-line if needed and optical clarity is really good, no distortion.
How does it work? I’ve put just 450 miles on the shield and I am very happy with the performance. The added width took a lot of pressure off your arms and makes longer rides much easier. I was actually surprised by this. The height is good, allowing airflow just at the top of my faceshield. The flow over my head is good for an over the top of the shield fittment. No, you won’t block every bug this way but I like to see OVER the shield. The super solid mount is a big improvement over the previous shield. Zero, and I mean ZERO shield flex when those big trucks blow by. The old shield made me wonder when it would be in my lap it flexed so much. That 0.077″ thickness gets it done with the superior OEM mounting hardware.
One last point, this shield DOES NOT have a little FLIP up at the top to send air a little higher over your head. Not sure why as the ClearView site makes a point about this feature. So far, it works well as is.
Hannu –
Great quality! Works as I expected. Thank you!
Kent –
Clearview made the original, so I was lucky enough to get a duplicate of the one I broke. It fit perfectly and is a quality product. Unusual quality in these days of cheap imitations and replacements. Highly recommended!