fbpx

Selected:

Road King Shields (5 Holes Across Horizontal Bracket)

$126.00$270.00

Road King Shields (5 Holes Across Horizontal Bracket)

$126.00$270.00

SKU HAR-RKD0 Categories ,

Our Road King replacement windshields are contoured, drilled and ready to mount to your stock Harley Davidson Windshield Brackets.

Clearview Shields are replacement shields, We do not offer brackets.

Fits ’94-later Road King® models: 57981-97, 57767-00, 57995-96, 57357-07, 58163-02, 58235-06, 57768-00, 58433-96, 58195-94, 58135-94, 58194-94

*** PLEASE NOTE: THESE SHIELDS WILL NOT FIT THE Road King Windshield Wind splitter Brackets Part Number 57400176 ***

  • 7 different heights available to tailor the shield height to your height
  • Upper Recurve pushes the air up higher creating a larger, quieter pocket. We apply just enough forward kick to the top edge of our windshields to create 1.5 to 2″ of lift to the air stream without the annoying distortion found on many competing screens.
  • All shields will be manufactured and shipped WITH THE RECURVE option unless you select “NO RECURVE”

Height:

  • Length is measured in the center of the shield from the top of the headlight cutout to the top of the shield
  • Windshield portion only do not measure from the headlight itself.
  • Stock Harley Davidson Road King Windshield measures 19.75″ (50cm)

Tints

Clearview Offers a wide selection of Tints to enhance the look of your New Windshield.

  • Dark gray only available in the 14″,16 and  17″ heights. Custom sizes and dark gray tint options for taller models are available upon request.  Just add your request to the “Notes” section at checkout.

For details click the “learn More”  link below.

Learn More

Width

All screens have the option for both stock width or our GT width which adds 1.25″ each side (2.5″ total).  Gt series width options are an excellent addition to enhance rider comfort by expanding the deflection of air around the sides and from underneath.  Width is compatible with both Stock Auxiliary light configurations and with no Auxiliary lights.  Special custom cuts need to be performed if your bike is equipped with Harley Davidson’s “Accessory” Auxiliary Light configuration as shown in photo gallery Contact our customer service department for more information.

Vent

Clearview is one of the few that offer vent options for your Harley Davidson Road King Windshield.  Venting a screen not only allows the rider optional air flow at their control but it will help to equalize the pressure behind the screen resulting in a reduction of turbulent air around the rider and passenger and the low frequency rumbling which can occur on most Motorcycles.

 

 

Clear

Additional information

WeightN/A
DimensionsN/A
Height

14.5 Inches, 16 Inches, 17.5 Inches, 18.5 Inches, 19.5 Inches, 21 Inches, 24 Inches

Recurve

No Recurve, Upper Recurve

Color

Clear, Dark Gray, Light Gray

Width

GT Width, Stock

HD optional Auxiliary Light Accessory

HD Accessory Auxiliary Lighting Bracket "No Bar under headlight Configuration", No Auxiliary Lights, Stock Auxiliary Lights "Bar under headlight configuration"

Vent Options

5 Position Adjustable Vent, No Vents

33 reviews for Road King Shields (5 Holes Across Horizontal Bracket)

5 star
80%
4 star
0%
3 star
0%
2 star
0%
1 star
20%
Powered by Customer Reviews Plugin
  1. Reid

    Clear 18.5″ w/Recurve

  2. Bob

    24″ Clear w/recurve

  3. David

    18.5″ light grey with recurve and adj. vent

  4. Tom

    18.5″ Light Grey with Recurve and Adj. vent

  5. Steve

    Clear Stock size with recurve.

  6. Carl

    22″ Road King Light Grey

  7. Brian

    Clear 22″ with recurve

  8. Louis

    Clear, Stock Height with Recurve

  9. Randy

    17″ Light Grey with Recurve

  10. Tim

    I received and installed my new shield today and wanted to let you know how pleased I am with it. I got the 2.5 shorter clear (with recurve) model for my 06 Road King Classic. Very easy to install, really like the extra rigidity so it doesn’t shake at idle like the stock unit, and I’ve found that at highway speeds, the main air stream runs about 4-5 inches above my head, while leaving plenty of vision space over the top of the shield, about nose level.

  11. Reggie

    Light Grey 19.5″ with recurve

  12. Rich

    Light Grey 17″ w/Recurve

  13. Garry

    18.5″ Light Grey with Recurve

  14. Howard

    I just wanted you to know how happy I am with a windshild I purchased from you 3 years ago. I know I was a real pain with all my questions and custom spesifications, but you didn’t seem to mind at all. You produced a product that far exceeded my expectations. Long distance riding on my 06 Road King is a much more pleasant experience behind the recurve shield you produced to my specifications. Thanks again for your patience and the excellent shield that still looks brand new after 30,000+ miles.

  15. Charles and Maggie

    Road King Stock Clear with Recurve

  16. Pete Z

    Happy Road King Rider with a new Clearview 17″ with a recurve!

  17. Dave

    Clear 18.5″ with recurve

  18. Armin

    New happy customer in Austria with our 22″ Road King windshield; clear with adjustable vent!

  19. Bob

    Just test drove my new 19.5″ rercurve with vent. 75mph and no buffeting. I had cut down my stock 22′” to 20.25″ so I could see over it and it caused alot of head buffeting. This one is perfect, I can see over it and no buffeting. Great product.

  20. Ken C

    Thank you ALL at Clearview Shields.

  21. Dale Anderson

    18 &1/2 in. Recurve light gray on a Road King.

  22. Carolyn Budnik

    After much research I chose the 15-inch recurve, vented, in the dark smoke, but I never bought it. Instead, my hubby surprised me with it for Christmas. I am extremely happy with it and tell everyone about your products. I recently rode from Fort Lauderdale to Syracuse, NY. In spite of the two long days in the saddle each way, I never had any buffeting or neck fatigue.

  23. Andrew H.

    I received my 19″ and 18″ shields last week Thursday. Well worth the wait!! The 19″ works fantastically! The vent makes all the difference. Set it on the second open for highway speeds and full for 45 and under. Really appreciate the ability to try out the shield. I bought another popular brand that I put on once to try out and am now stuck with! I will be a life long customer for sure! Great customer service also!

  24. Robert H

    Thought it would be interesting to show you how great your recurve 15 inch clear looks and has held up on my freshened up 04 Road King custom.

  25. Vaughn S,

    I received my windshield and got it installed on my 1995 Road King. I appreciate the discount for the ‘blemish’, but truthfully, it is absolutely beautiful. It is a bit shorter than the shield that was on the bike, but it works incredibly well. The vent is an awesome addition and I would recommend it to anyone who wants more comfort. Thanks for a great product! Vaughn Slavin

  26. Jerry Seiter Ohio

    I ordered a 18.5 inch light gray windshield for my 2007 Road King custom. I took the 18 days that the website states to get it. The windshield is very good quality, looks great and fits well. I did have the vent added to my order and would say I would not do that if I ordered a new one. It sets high on the shield and blocks your vision. They did call me before shipping and said there was a blemish on the shield and if I wanted they could remake it or ship with the blemish. I had them ship it and the area is very small. I will keep the shield. I would have liked to know if the shield needed to be sealed before using but only instructions on how to clean it? High quality windshield and great communication from Clearshield.

  27. G Melfy

    It took a little over two weeks to receive my Clearview Shield for my Road King, but it was well worth the wait. I received it on March 16th and what a pleasure to ride with it.

  28. David Harrison

    I spent more than enough time researching replacement shields for the stock 20” that came on my 2017 RK. Eventually I settled on Clearview and could not be happier with the 17.5” with recurve and extra width. Wind buffeting is diminished and the extra width keeps wind off hands which helps on cool morning commutes. The 17.5” allows me to look over the top whether solo or two up. My riding experience is much improved. Thanks Clearview!

  29. Bill O’Mara

    Just installed my new road king 19 1/2” shield with vent, recurve & wider than stock. It works great backroads & hiway. Glad I purchased it. Gary was great to answer all questions. Shipping was fast. Thank you Clearview!

  30. Doug M.

    Hi Everyone at Clearview

  31. Jerry F.

    I really like the shield.

  32. Kenneth J.

    The customer service was fine, no issues. The packaging was great. The shield works as advertised. 24 inch recurve, clear with vent plus 2.5 inches. Optical clarity is good, no distortion when looking through the shield, the vent eliminates buffeting except with extreme crosswinds. I use this in combination with the HD front fork wind deflectors, the combination provides great airflow management.

  33. Steve

    17.5″ recurve light gray on 2008 Road King. Superior windshield over stock! Easy install. With all the options to get exactly what you want for a fair price, why buy anything else? Also recommend the Novis #1 clean & shine. Been using it for years. Simply the best for cleaning motorcycle windshields.

Add a review

Your email address will not be published. Required fields are marked *

Need Help

Let our customer service department help you choose the perfect windscreen for your specific bike (some or our most popular models are Harley Davidson Ultra Glide, Tri Glide, Street Glide and FXRT) and, more importantly, your personal riding style! The motorcyclist is the most important part of our business. All of our motorcycle windscreens are D.O.T. approved – your safety is important to us!

Close Menu
×

Cart