fbpx

Selected:

K75LT-K75RT & K100LT - K100RT Windshield

$201.00$306.00

K75LT-K75RT & K100LT - K100RT Windshield

$201.00$306.00

SKU BMW-K75T Categories ,
  • 3 different heights available to tailor the shield height to your height
  • 1 piece design for improved air flow
  • Nylon collars to insulate screws and help protect from over tightening
  • Lower black masking covers lower dash area for a clean, finished look
  •  Please note that the angle of this shield is based on the LT and will be slightly different than the stock angle on an RT windshield

Vent – there are two options:

  • Standard position vent is 6 1/4″ from bottom of shield to bottom of the vent
  • High position vent is 10 3/4″ from bottom of shield to bottom of vent (if addtional instruments have been added to the inner dashboard)

Measurement Location:

  • Length is measured in the center of the shield from top to bottom
  • The angle of our replacement is 47 degrees when mounted on the bike
Clear

Additional information

WeightN/A
DimensionsN/A
Width

Stock

Height

21 Inches, 24 Inches, 27 Inches

Color

Clear, Light Gray

Vent Options

High Position Vent, No Vents, Standard position

9 reviews for K75LT-K75RT & K100LT – K100RT Windshield

  1. Paul

    My Clearview windshield arrived on Friday. On my ‘87 K100RT, it has eliminated most wind noise below 60 mph and significantly reduced the buffeting noise between 60-80 mph. It protects my arms from the cold, piercing wind and it does not cause a back draft or pressure on my back. As well, it does not flex in the wind as did the stock windshield. As an added bonus, for the first time I can see the road directly in front of me through the windshield. The stock windshield did not allow this view. I was concerned that the tint might be too dark, but no, it is just enough to reduce the glare. As with the stock,I am able to see over the windshield for a clear unobstructed view of the road.

  2. Ed

    Custom 22″ Light Grey

  3. Dennis

    I purchased a 1990 K75RT this spring, and one of the first things I did was order a Clearview shield for it. I’ve been using a Clearview on my other bike for a few years now and have been extremely pleased.

  4. Paul

    BMW 21″ Clear

  5. Brian

    How are things state side? It has taken me a while to respond to the

  6. Eric

    21″ Light Grey

  7. Steve

    I received the shield two days ago, installed it and took the bike for a test ride, and I want to tell you that I am very happy with the product. The fit and finish are great, and the modifications I asked for (non-standard location of the vent and reduction of the shield height) are spot on. I now have a true see-over windshield on my BMW K100, with better aerodynamics than the stock shield and a vent that directs airflow where I want it, or can be closed off on chilly mornings. I had previously tried a Parabellum aftermarket shield and returned it, unsatisfied. Your shields are clearly better than Parabellum’s, in my opinion.

  8. Mike

    BMW 21″ Clear w/5 position adjustable vent

  9. EJ

    BMW 27″ Clear with adj. vent in high position:

Add a review

Your email address will not be published. Required fields are marked *

Need Help

Let our customer service department help you choose the perfect windscreen for your specific bike (some or our most popular models are Harley Davidson Ultra Glide, Tri Glide, Street Glide and FXRT) and, more importantly, your personal riding style! The motorcyclist is the most important part of our business. All of our motorcycle windscreens are D.O.T. approved – your safety is important to us!

Close Menu
×

Cart