Phone: 800-798-6089

V-Star 950 / V-Star 1300

5 out of 5 based on 4 customer ratings
(4 customer reviews)

$155.00$262.00

These windshields are pre-drilled and pre-contoured to mount to your the OEM Yamaha V-Star 1300 Brackets.

4 Different Heights Available to Tailor the Shield Height to Your Height

Added Width for Increased Protection for Your Arms and Shoulders

Choose Width

+4 Inches

4 Inches Wider than Stock

Choose Height

How to choose the correct height shield

 

GT14 14" L +4" Wider than stock
GT16 16" L +4" Wider than stock
GT18 18" L +4" Wider than stock
GT20 20" L +4" Wider than stock
  Measurement Location:
        Height is measured from the top of the headlight cutout to the top of the shield.
        Note: These Shields are Designed to Mount to the OEM Yamaha V-Star 950/1300 Brackets.* Clearview Shields are designed as "replacement" windshields. We do not offer any brackets/braces/framing or any other hardware. Our windshields are pre-drilled and pre-contoured to mount to your existing OEM setup.
        • These Shields are Designed to Mount to the OEM Yamaha V-Star 1300 Brackets.
        • Clearview Shields are designed as "replacement" windshields.
        • We do not offer any brackets/braces/framing or any other hardware.
        • Our windshields are pre-drilled and pre-contoured to mount to your existing OEM setup.
14 Inches
16 Inches
18 Inches
20 Inches

Choose Color

39948

DSC03115
Clear

Allows 96% of the light to transmit through the screen.

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Vent Options

For more information about vents click here

5 Position Adjustable Vent

allows rider controlled airflow to enhance comfort in warmer climates, and helps relieve back pressure, adjusts in 5 different positions

No Vents

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 30 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount to your Yamaha Brackets (we do not offer any brackets)
  • 4 Different Heights Available to Tailor the Shield Height to Your Height
  • Added Width for Increased Protection for Your Arms and Shoulders
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • These Shields are Designed to Mount to the OEM Yamaha V-Star 1300 Brackets.
  • Clearview Shields are designed as “replacement” windshields.
  • We do not offer any brackets/braces/framing or any other hardware.
  • Our windshields are pre-drilled and pre-contoured to mount to your existing OEM setup.

Additional Information

Width

+4 Inches

Height

14 Inches, 16 Inches, 18 Inches, 20 Inches

Color

Clear, Light Gray

Vent Options

5 Position Adjustable Vent, No Vents

4 reviews for V-Star 950 / V-Star 1300

  1. Brett
    5 out of 5

    :

    20″ Light Grey w/RC

    I bought my 2009 VStar 1300 new last year. I really liked the bike but was never too keen on the tall stock windshield. This year I started looking around at after market replacement windshields and after doing an internet search I came across Clearview. Not only could I get a shorter windshield but the Clearviews were also wider than the stock windshields. I read the reviews and decided Clearview was the way to go.

    I then contacted Mark at Clearview and he gave me some bonus info. He suggested I change the angle of the windshield mounting and add recurve to the shield just like a previous Clearview customer had done. I went with his suggestion and added a light gray tint. I followed his installation instructions and now my VStar has the look I want.

    The performance of the Clearview is great too. I look over the top edge of the windshield and still get the wind protection I want. Also, I just completed a 4000 mile road trip and the windshield cleaned up with no visible scratches. I give Clearview 2 thumbs up!

    Brett
    Blair, NE

  2. David
    5 out of 5

    :

    Clear 20″ shield

    The buffeting on this bike always bothered me. I was almost ready to trade it off until I found Clearview Shields.

    Unlike other manufacturers, Mark at Clearview worked with me to resolve the problem rather than just trying to sell me what they had.

    After discussing the proper shield angles with Mark, I tilted the shield bracket back to match the forks and I found most of the buffeting was gone. After that, they added a recurve to the shield, something they don’t recommend with the standard setup. Wow – what a difference! Not only is the buffeting gone I can actually hear! My ride is enjoyable again.

    I can’t recommend Clearview enough. Thanks for everything!

    David
    Colorado Springs, Co

  3. Karl
    5 out of 5

    :

    20″ Clear with Adjustable vent

    “I had no idea that I was being so battered about by wind until after I took a 150 mile+ trip behind my 20\” Clearview w/ regurve and 5-position vent. I can even hear my engine. Although, like any windshield, going into headwinds, it seems like I’ve got a barn door on the front, comfort behind said Clearview is worlds above the stock product.”

    Karl
    Richardson, TX

  4. Larry
    5 out of 5

    :

    18″ Light Grey with Recurve

    Hi, This is the 2nd shield I’ve purchased from clearview. The one on my 2000 1100 ACE is still looking like new. The 1 I just put on my 2012 VT 1300 is exactly what this bike needed, exactly the right height and is a great improvement over the stock (narrow/high) one. Communicating with clearview was excellent: I changed my mind about the specs a couple of times before it went into production and the response was quick and positive. In summary: I’ll not hesitate to purchase from you again. Thanks

    Larry
    Canada

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886