Phone: 800-798-6089

Victory Kingpin Windshield – Lock-N-Ride

$145.00$193.00

The Victory  Kingpin Lock-N-Ride Windshields are Designed to Mount to the OEM Victory 54mm Lock-N-Ride Brackets.

4 Different Heights Available to Tailor the Shield Height to Your Height

2″GT” Models with added Width for Increased Protection for Your Arms and Shoulders (Not Available in 18″L and 20″L)

Contoured Shape for Improved Air Flow & Shield Strength

SKU: VIC-KPLR. Category: .

Choose Width

GT22 21.5 26" 2" wider than stock
GT23 23" 26" 2" wider than stock
+2 Inches

2 Inches Wider than Stock

Stock

Choose Color

39948

Clear

Allows 96% of the light to transmit through the screen.

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Recurve Options

For more information about recurves click here

No Recurve
Upper Recurve

• Pushes the Airflow 1.5" - 2" Higher • Creates a Better Pocket with a Shorter Shield • Makes the Shield More Rigid • Adds a Nice Look to the Shield

Choose Height

How to choose the correct height shield

 

Short 18" 24"
Stock 20" 24"
GT22 21.5 26" 2" wider than stock
GT23 23" 26" 2" wider than stock
  Measurement Location:
      height is measured from the top of the headlight cutout to the top of the screen
      • These Shields are Designed to Mount to the OEM Victory 54mm Lock-N-Ride Brackets.
      • Clearview Shields are designed as "replacement" windshields.
      • We do not offer any brackets/braces/framing or any other hardware.
      • Our windshields are pre-drilled and pre-contoured to mount to your existing OEM setup.
18 Inches
20 Inches
21 Inches
23 Inches

Choose Lock N Ride Bracket

Lock N Ride Narrow Fork Bracket

Lock N Ride Narrow Fork Bracket measures 5 5/8 inches from center mounting hole to outside mounting hole on horizontal windshield bracket.Victory Lock and Ride    

Lock N Ride Wide Fork Bracket

Lock N Ride Wide Fork Bracket measures 6 1/2 inches from center mounting hole to outside mounting hole on horizontal windshield bracket.

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 25 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount to your OEM Brackets (we do not offer any brackets)
  • 4 Different Heights Available to Tailor the Shield Height to Your Height
  • 2″GT” Models with added Width for Increased Protection for Your Arms and Shoulders (Not Available in 18″L and 20″L)
  • Contoured Shape for Improved Air Flow & Shield Strength
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • These Shields are Designed to Mount to the OEM Victory 54mm Lock-N-Ride Brackets.
  • Clearview Shields are designed as “replacement” windshields.
  • We do not offer any brackets/braces/framing or any other hardware.
  • Our windshields are pre-drilled and pre-contoured to mount to your existing OEM setup.

Additional Information

Width

+2 Inches, Stock

Color

Clear, Light Gray

Recurve Options

No Recurve, Upper Recurve

Height

18 Inches, 20 Inches, 21 Inches, 23 Inches

Lock N Ride Bracket

Lock N Ride Narrow Fork Bracket, Lock N Ride Wide Fork Bracket

Reviews

There are no reviews yet.

Be the first to review “Victory Kingpin Windshield – Lock-N-Ride”

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886