Phone: 800-798-6089

Triumph America, Bonneville, T100 & Speedmaster Fits Roadster Brackets

5 out of 5 based on 4 customer ratings
(4 customer reviews)

$120.00$178.00

These Triumph America Bonneville Windshields are Designed to Mount to the OEM Triumph Roadster Brackets.

3 Different Heights Available to Tailor the Shield to your Height

2″ Added Width on GT Models for Increased Side Protection

SKU: TRI-ABRB. Category: .

Choose Height

How to choose the correct height shield

 

Stock 16" L
GT Medium 18.5" L 2.5" Longer than Stock
GT Large 20" L 4" Longer than Stock
Will not fit 'Longhaul' brackets
  Measurement Location:
    • Length is measured in the center of the shield from the top of the headlight cutout to the top of the shield.
      • These Shields are Designed to Mount to the OEM Triumph Roadster Brackets.
      • Clearview Shields are designed as "replacement" windshields.
      • We do not offer any brackets/braces/framing or any other hardware.
      • Our windshields are pre-drilled and pre-contoured to mount to your existing OEM setup.
Large
Medium
Stock

Choose Recurve Options

For more information about recurves click here

No Recurve
Upper Recurve

• Pushes the Airflow 1.5" - 2" Higher • Creates a Better Pocket with a Shorter Shield • Makes the Shield More Rigid • Adds a Nice Look to the Shield

Choose Color

40615

Clear

Allows 96% of the light to transmit through the screen.

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Width

Not available in the 16"L
+2 Inches

2 Inches Wider than Stock

Stock

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 31 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount to your Roadster Brackets (we do not offer any brackets)
  • 3 Different Heights Available to Tailor the Shield Height to Your Height
  • 2″ Added Width on GT Models for Increased Side Protection
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • These Shields are Designed to Mount to the OEM Triumph Roadster Brackets.
  • Clearview Shields are designed as “replacement” windshields.
  • We do not offer any brackets/braces/framing or any other hardware.
  • Our windshields are pre-drilled and pre-contoured to mount to your existing OEM setup.

Additional Information

Height

Large, Medium, Stock

Recurve Options

No Recurve, Upper Recurve

Color

Clear, Light Gray

Width

+2 Inches, Stock

4 reviews for Triumph America, Bonneville, T100 & Speedmaster Fits Roadster Brackets

  1. Mike
    5 out of 5

    :

    Hi,

    Here’s a picture of me and my 2006 Triumph America with your 20″ windshield.

    Thanks for the great product.

    Mike
    Fresno, CA

  2. Thomas
    5 out of 5

    :

    I want to congratulate you on a job well done. I am absolutely astounded at the quality of your windshields. The fit perfectly – better than the factory shields.
    Thanks again.

    Trophy GT Large & Roadster GT Medium

    Thomas
    Maryville, TN

  3. Leon
    5 out of 5

    :

    Thanks for the work you did on my windscreen, it helps a lot with the head buffeting

    Thanks again

    Leon
    Corpus Christi, TX

  4. Roy
    5 out of 5

    :

    Clear Lg w/no recurve

    This new windscreen gives more weather protection than the stock Triumph screen. It’s really noticeable and welcome.

    Still getting experience with it to decide, for sure, if I don’t mind looking “through” instead of “over” it, but that was “my” choice…

    One thing I sure didn’t expect was that this windscreen noticeably “steadied” the front end, at expressway speeds, in certain wind conditions!
    Pleasant surprise. It wasn’t real busy before, but sometimes it just feels “rock solid” now.

    I would recommend your company and products to anyone.

    Roy
    Jax. Fl

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886