Phone: 800-798-6089

Vulcan 1600 Classic Windshield

5 out of 5 based on 4 customer ratings
(4 customer reviews)

$125.00$262.00

The Vulcan 1600 Classic windshields are pre-drilled and pre-contoured to mount to your existing OEM brackets.

All 6 hole mounts sizes fit Kawasaki Shield #K46001-321A or K46001-322A.

The 18″L 4 hole mount fits the Kawasaki Shield #K46001-323

5 Different Heights Available to Tailor the Shield to Your Height Needs

1″ Added Width for Increased Side Protection (Not available on the 4 hole mount)

SKU: KAW-V16C. Category: .

Choose Recurve Options

For more information about recurves click here

No Recurve
Upper Recurve

• Pushes the Airflow 1.5" - 2" Higher • Creates a Better Pocket with a Shorter Shield • Makes the Shield More Rigid • Adds a Nice Look to the Shield

Choose Vent Options

For more information about vents click here

5 Position Adjustable Vent

allows rider controlled airflow to enhance comfort in warmer climates, and helps relieve back pressure, adjusts in 5 different positions

No Vents

Choose Color

Clear

Allows 96% of the light to transmit through the screen.

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Height

How to choose the correct height shield

 

  20" L
  18" L
  21" L
  23" L
  24.5" L
Small 4 hole 18" L (4 Mounting Holes on Horizontal Bracket)
  Measurement Location:
    • Length is measured in the center of the shield from the top of the headlight cutout to the top of the shield.
18 inch 4 hole mount
18 Inches
20 Inches
21 Inches
23 Inches
24 Inches

Choose Width

Additional width available in the 18"L,20"L, 21"L, 23"L, 24.5"L, (Not available on the 4 hole mount)    
+1 Inch

1 Inch Wider than Stock

Stock

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 31 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount to your Kawasaki Brackets (we do not offer any brackets)
  • 5 Different Heights Available to Tailor the Shield Height to Your Height
  • 1″ Added Width on 18″L, 21″L, 23″L, 24.5″L  for Increased Side Protection (Not available on the 4 hole mount)
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  •  These Shields are Designed to Mount to the OEM Kawasaki Brackets.
  • All sizes except for the 18″L 4 hole mount, have 6 mounting holes across the horizontal bracket and fit Kawasaki Shield #K46001-321A or K46001-322A.
  • The 18″L 4 hole mount  across the horizontal bracket, shield fits the Kawasaki Shield #K46001-323 
  •  Clearview Shields are designed as “replacement” windshields.
  • We do not offer any brackets/braces/framing or any other hardware.
  • Our windshields are pre-drilled and pre-contoured to mount to your existing OEM setup.

Additional Information

Recurve Options

No Recurve, Upper Recurve

Vent Options

5 Position Adjustable Vent, No Vents

Color

Clear, Light Gray

Height

18 inch 4 hole mount, 18 Inches, 20 Inches, 21 Inches, 23 Inches, 24 Inches

Width

+1 Inch, Stock

4 reviews for Vulcan 1600 Classic Windshield

  1. Steve
    5 out of 5

    :

    I was very happy to receive my new 23″ windshield yesterday. I rushed home and installed it as you suggested with the paper backing. The quality, fit and ease of installation are all excellent. My initial test run was very promising. I returned home, removed all of the protective film, applied wax to the chrome brackets and reinstalled the windsield. I had a good opportunity to test this with a strong 20mph wind and a 70mph run down the interstate.. This shield significanly reduced buffeting and wind noise. All I can say is, “Thumbs up to you guys”.

    Thank you again for such a fine quality product!

    Steve
    Greenbay, WI

  2. Dean
    5 out of 5

    :

    HERE ARE THE PIXS I PROMISED OF YOUR SHIELD ON THE 2003 VULCAN 1600,21″ WITH LIGHT EURO CURVE. SHIELD FIT GREAT AND WORKS GREAT.NO MORE HELMET BUFFER.

    HAVE TOLD A LOT OF PEOPLE ABOUT SHIELD AND YOUR COMPANY.THANKS FOR YOUR HELP AND GREAT PRODUCT.I’LL KEEP PASSING ALONG THE GOOD WORD.
    DEAN
    Glen Cove, NY

  3. Scott
    5 out of 5

    :

    24.5″ Light Grey with 5 position adj. vent

    Guy’s,

    I Love This Shield -And So Does My Wife ! (The Recurve Reduced Her Hair Blowing To A Minimum!

    I had this installed at the Harley dealer where I purchased this bike from as part of the deal,
    You Should Have Seen All The Great Looks & Comments I Received From This Shield On The Bike At The Dealer –

    I Have Told A Lot Of People About The Shield And Your Company Web Site – What A Great Product.
    I’LL KEEP PASSING ALONG THE GOOD WORD.

    Scott
    Medina, Ohio

  4. David
    5 out of 5

    :

    22.5″ Clear with recurve

    Here is a pic of my recently ordered and installed GT23 shield w/recurve. The added 4 inches from my stock windshield has greatly improved my riding experience. No longer do I feel like another Kansas riding bobblehead! Thank you guys for the product and service!

    David
    Wichita, KS

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886