Phone: 800-798-6089

Vulcan 1500 (Fuel Injected) Windshield

5 out of 5 based on 6 customer ratings
(6 customer reviews)


The Vulcan 1500 Classic Fuel Injected  windshields are pre-drilled and pre-contoured to mount to your existing OEM brackets.

4 Different Heights Available to Tailor the Shield to Your Height Needs

2″ Added Width on 19″L and 3″ Added Width on 20″L,21″L,22.5″L  for Increased Side Protection

SKU: KAW-V15F. Categories: , .

Choose Width

2" Added Width on 19"L, 3" Added Width on  20"L,21"L,22.5"L  for Increased Side Protection  
+2 Inches

2 Inches Wider than Stock

+3 Inches

3 Inches Wider than Stock


Choose Height

How to choose the correct height shield


Stock 15.5" L
Measurement Location:
    • Length is measured in the center of the shield from the top of the headlight cutout to the top of the shield.
15 Inches
19 Inches
20 Inches
21 Inches
22 Inches

Choose Color


Allows 96% of the light to transmit through the screen.

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Vent Options

For more information about vents click here

5 Position Adjustable Vent

allows rider controlled airflow to enhance comfort in warmer climates, and helps relieve back pressure, adjusts in 5 different positions

No Vents

Choose Recurve Options

For more information about recurves click here

No Recurve
Upper Recurve

• Pushes the Airflow 1.5" - 2" Higher • Creates a Better Pocket with a Shorter Shield • Makes the Shield More Rigid • Adds a Nice Look to the Shield

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 31 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount to your Kawasaki Brackets (we do not offer any brackets)
  • 4 Different Heights Available to Tailor the Shield Height to Your Height
  • 2″ Added Width on 19″L, 3″ Added Width on  20″L,21″L,22.5″L  for Increased Side Protection
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • These Shields are Designed to Mount to the OEM Kawasaki Brackets.
  • Clearview Shields are designed as “replacement” windshields.
  • We do not offer any brackets/braces/framing or any other hardware.
  • Our windshields are pre-drilled and pre-contoured to mount to your existing OEM setup.*** PLEASE ALSO NOTE: our mounting holes are higher than the stock OEM setup and will affect your ability to adjust the windshield. Please call if you have questions

Additional Information


+2 Inches, +3 Inches, Stock


15 Inches, 19 Inches, 20 Inches, 21 Inches, 22 Inches


Clear, Light Gray

Vent Options

5 Position Adjustable Vent, No Vents

Recurve Options

No Recurve, Upper Recurve

6 reviews for Vulcan 1500 (Fuel Injected) Windshield

  1. Marty
    5 out of 5


    Received the new shield today and it lines up perfectly. Thanks for the great service and quick delivery. Will definitely recommend you to my friends.
    Thanks Again,


  2. Mark
    5 out of 5


    Pictures of the new Clearview windshield installed yesterday. 2002 Kawasaki Vulcan Classic 1500 FI.

    Pollock Pines, CA

  3. Ron
    5 out of 5


    A while ago you provided exceptional assistance in getting a new Clearview windshield to me in time for my vacation trip. Originally you quoted a production lead time that would not have met my needs, but after hearing of my time requirements, you rushed my windshield through in a greatly reduced time. Your efforts were very much appreciated and the windshield and I had a great vacation as a result.

    My trip carried me 4700 kilometers (3000 miles) through the interior of British Columbia, down through Alberta and then back west through northern Montana, southern BC and northern Washington. Attached is a photo taken through your Clearview shield going over Washington Pass, west of Winthrop, WA. I feel my stylization of the photo reflects the contribution of the Clearview windshield.

    I coupled your windshield with new self-made lowers, significantly larger than my original F&S units. Together, they virtually eliminated the annoying wind buffeting, other than with cross winds where significant. In addition they improved riding cold and wet riding conditions.

    Thanks again,

    Blaine, WA

  4. Preston
    5 out of 5


    I wanted to get back to you and thank you for the great shield. It looks great and provides just the protection I wanted.

    I mated it with some Moxy Lowers for under $100.00 to complete the package.

    I’ve already started to get querries from folks that have seen the shield and will direct them your way.

    Thanks again.

    Indianapolis, IN

  5. Chuck
    5 out of 5


    The windshield showed up on Friday as promised. I put it on Saturday and made a 250 mile trip on Sunday. It is EXCELLENT!! Just what I needed. Thanks so much for your help.

    Dickinson, TX

  6. Larry
    5 out of 5


    GT21 Light Grey w/5 position adjustable vent and recurve

    Got my new windshield yesterday and installed it last night. It looks GREAT!!!!!

    Thanks! I love it and so does the princess that rides behind me

    Branson MO

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886