Phone: 800-798-6089

VTX1300 Retro, C & S Models Windshield 2005 – Present & VTX1300 C 2004 Windshield

5 out of 5 based on 4 customer ratings
(4 customer reviews)


VTX1300 Retro, C & S windshields are pre-drilled and pre-contoured to mount to your existing OEM brackets

2″ Added Width for Increased Protection for Your Arms and Shoulders

Same Shape and Contour as the Stock Honda Shield

SKU: HON-13CS. Categories: , .

Choose Width

+2 Inches

2 Inches Wider than Stock

Choose Height

How to choose the correct height shield


  21" L 1.5" Longer than Stock
  24.5" L 5" Longer than Stock
  Measurement Location:
    Length is measured in the center of the shield from the top of the headlight cutout to the top of the shield.
  •  24.5" Height options can not ship internationally due to the size of the container
21 Inches
24 Inches

Choose Color


Allows 96% of the light to transmit through the screen.

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Vent Options

For more information about vents click here

5 Position Adjustable Vent

allows rider controlled airflow to enhance comfort in warmer climates, and helps relieve back pressure, adjusts in 5 different positions

No Vents







VTX1800 Traditional Brackets

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 31 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount to your Honda Brackets (we do not offer any brackets)
  • 2 Different Heights Available to Tailor the Shield Height to Your Height
  • 2″ Added Width for Increased Protection for Your Arms and Shoulders
  • Same Shape and Contour as the Stock Honda Shield
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • These Shields are Designed to Mount to the Honda Brackets.
  • Clearview Shields are designed as “replacement” windshields. We do not offer any brackets/braces/framing or any other hardware.

Additional Information


+2 Inches


21 Inches, 24 Inches


Clear, Light Gray

Vent Options

5 Position Adjustable Vent, No Vents



4 reviews for VTX1300 Retro, C & S Models Windshield 2005 – Present & VTX1300 C 2004 Windshield

  1. Bob
    5 out of 5


    VTX1300 w/a Clearview Shield – a perfect match!

    Thanks so much! It is absolutely PERFECT!

    I am happy I switched to the tallest one. It was a snap to install! I am 73 and the installation only took me about 50 minutes! Peeling the plastic off was more time consuming than switching out the grommets and re-installing it!

    The wind and wind noise is GREATLY reduced. The duct (vent) is a great option that I would heartily recommend!

    You performed delivery exactly as promised. Please feel free to use the attached pictures and this letter for whatever you want.
    Thank You for a great product!
    Disputante, VA

  2. Bob
    5 out of 5


    Light Grey Custom height on a VTX1300T

    Hello Mark,

    I received the new windshield for my Honda VTX 1300T three days ago. It was packaged very professionally, and the high quality was immediately apparent. I installed it that evening – it fit the Honda mounting brackets perfectly. I then took the bike for a short test ride and noticed an immediate improvement in the wind dynamics of the bike, which of course pleased me.

    The next night I took the bike for a 50 mile ride to check it out more thoroughly. My impressions of the previous evening were confirmed. It was a very breezy evening, the kind that would normally have had me avoiding the interstates (20 mph winds with higher gusts). The wind buffeting around my helmet is now gone, which is especially noticeable in headwinds. If I stretch my head up just an inch or two higher, the wind is right there – perfect. I’m now have a smooth ride at 70+ mph. I also noted that the new shield does not flex in the wind like the original equipment did. My 1,200 mile (round trip) road trip to visit my brother later this year will now be on the bike instead of in the car. Needless to say, I am extremely happy with the performance of the new shield.

    The shield looks great as well. The light grey tinting goes nicely with the black and chrome of the bike. A picture is attached.

    Thanks again for taking the time to make sure I got the shield that I needed. Being able to order a custom size was great, and the height of the shield is perfect for me.

    I will recommend Clearview Shields to anyone who will listen to me. If I ever need another windshield for any bike I will be getting in touch with you again.

    Thanks and best regards,

    Fraser, MI

  3. wayne
    5 out of 5


    The windshield I ordered arrived in fine shape, obviously packed by someone who understands what loving care means. The screen is a little bit thicker/heavier plastic, and just feels like quality material. I installed it in just a few minutes, and took it for a fifty minute ride. Again a whole new world. The proof to me was it was the first time on the bike that I was able to crack the screen on my helmet and not have the wind push it shut. Absolutely no vibration on the screen itself, up through the gears all the way to freeway speeds.

    So my humble opinion is that if you are anything over about 5 foot 9 inches tall, the stock Honda Boulevard Windshield is not tall enough to be totally helpful, but Clearview Shields has engineered the answer. They added four inches in height and a couple inches in width to the screen, that made a big difference for my six foot two frame. So I’m happy to have big screen coverage while retaining a small screen look. For me this is “just right”.

    Sahuarita, AZ

  4. Edwin Spomer
    5 out of 5


    I ordered the windshield. I had a specialized order cut down. They did it no problem. I needed it before Daytona Bike Week and they made sure I had it way before the scheduled shipping date. I ordered the windshield tinted with the vent. It works great No wind buffeting like the stock shield. Looks great,mounts easy.They are very professional company.

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886