Phone: 800-798-6089

Honda Valkyrie STD/ & Tourer Shields

5 out of 5 based on 28 customer ratings
(28 customer reviews)

$165.00$282.00

Valkyrie Std/ Tourer windshields are pre-drilled and pre-contoured to mount to your existing OEM brackets

6 Different Heights Available to Tailor the Shield Height to Your Height

1″ Added Width on  Models for Increased Protection

SKU: HON-VKTS. Category: .

Choose Width

The 1" additional width is available in 21"L, 22.5"L, 24"L and 25.5"L
+1 Inch

1 Inch Wider than Stock

Stock

Choose Height

How to choose the correct height shield

 

HONDA VALKYRIE MEASUREMENTS
  17" L 4" Shorter than Stock
  19" L 2" Shorter than Stock
  21" L  .5" Shorter than Stock
  22.5" L 1" Longer than Stock
  24" L 2.5" Longer than Stock
  25.5" L 4" Longer than Stock
  Measurement Location:
  • Length is measured in the center of the shield from the top of the headlight cutout to the top of the shield.
  • 22.5", 24" and 25.5" Height options can not ship internationally due to the size of the container
17 Inches
19 Inches
21 Inches
22 Inches
24 Inches
25 Inches

Choose Color

DSC03115                              

 CONTACT US FOR DARK GRAY OPTIONS

Clear

Allows 96% of the light to transmit through the screen.

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Vent Options

For more information about vents click here

5 Position Adjustable Vent

allows rider controlled airflow to enhance comfort in warmer climates, and helps relieve back pressure, adjusts in 5 different positions

No Vents

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 31 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount to your Honda Brackets (we do not offer any brackets)
  • Designed with the Same Shape and Contour as the Stock Honda Shield
  • 6 Different Heights Available to Tailor the Shield Height to Your Height
  • 1″ Added Width on GT Models for Increased Protection
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • These Shields are Designed to Mount to the OEM Honda Brackets.
  • Clearview Shields are designed as “replacement” windshields. We do not offer any brackets/braces/framing or any other hardware.

Additional Information

Width

+1 Inch, Stock

Height

17 Inches, 19 Inches, 21 Inches, 22 Inches, 24 Inches, 25 Inches

Color

Clear, Light Gray

Vent Options

5 Position Adjustable Vent, No Vents

28 reviews for Honda Valkyrie STD/ & Tourer Shields

  1. Jim
    5 out of 5

    :

    Shield arrived safe and sound today. I have mounted it and am EXTREMELY pleased with your craftsmanship!

    Thanks!

    Jim
    Mims, FL

  2. Dan
    5 out of 5

    :

    I purchased one of your Clearview shields with vent and grey tint for my 1999 Honda Valkyrie. Your service was excellent and the product is also great.

    I wanted you to know that I appreciate your product very much.

    Respectfully,

    Dan
    Midlothian, TX

  3. Richard
    5 out of 5

    :

    I just wanted to write and state how impressed I am with the fit, finish, and overall quality of my new windshield for my Honda Valkyrie. It certainly exceeded all of my already very high expectations. In addition, customer service answered all questions with haste and precision. Thanks for making me a happy customer!

    Richard
    Swampscott, MA

  4. Jerry
    5 out of 5

    :

    Clear stock height w/5 way adjustable vent

    I just wanted to let you know how happy I am with my Clearview Shield. I purchased it early this past spring and took numerous trips putting several thousand miles on my bike.

    The Clearview Shield was perfect, it is less flexible than the OEM (a good thing) and is more resistant to chipping. Great product and service.

    Thanks!
    Jerry
    Layton Utah

  5. Brian
    5 out of 5

    :

    Mark
    I received the windshield for my 1999 Valkyrie Tourer. I would like to thank you for your help with this. I found that the installation of the windshield was as easy as replacing it with a factory windshield. the quality of your windshield is of much better quality than the last OEM windshield I purchased. It is made of a much heavier product and appears to be much clearer.

    Again, thanks for your help
    Brian
    Columbia, SC

  6. Craig
    5 out of 5

    :

    Clear stock height, GT width

    My windshield arrived in good condition.

    It fit perfectly. The thickness and quality are superior to any other windshield I have seen.

    Thanks.
    Craig
    Mastic, NY

  7. Gary
    5 out of 5

    :

    24″ Light Grey w/Adjustable Vent

    It is my pleasure to relate my total satisfaction with the GT2 shield I purchased for my 2003 Honda Valkyrie Standard. The shield is blemish-free, and the light gray tint helps reduce the sun’s glare on all the chrome on my Valkyrie. The shield size is just right so I am in a wind-protected bubble where I get plenty of air, partially thanks to the vent, but no helmet buffeting. I am totally satisfied with my new shield and riding my motorcycle has never been more enjoyable! Thank you so much!

    Gary
    Jacksonville, FL

  8. Lothair
    5 out of 5

    :

    24″ Clear with adjustable vent

    A Happy Clearview rider on his Valkyrie…

    Mark,

    I received my windshield a couple weeks ago and just had an opportunity to install it this past weekend. In Wisconsin, the weather is pretty cold here and I don’t have many chances to try it out before the snow flies. I did get about 50 miles in yesterday and I like it. It’s solid and, because my 15 year old OEM windshield was de-laminating a little, the new shield is clearer.

    The new shield sure is thicker than stock also… stronger looking.

    Wind protection is better than OEM (which is another reason I bought it) and I think I’m going to like it. I hope there are a few more chances to ride before the snow flies here.

    thank you for making a solid product. From all I can tell, I think it’s going to be a great addition to my bike.

    Lothair
    Waikesha, WI

  9. Lane
    5 out of 5

    :

    Clear GT Stock

    Great comments from a happy Valkyrie Rider:

    Hi. You asked for a my experience/impression with your company.
    1) Quality 100%
    2) Fit 100%
    3) Communications with Clearview Shields 100%

    I recommend your company to anyone.

    Sincerely

    Lane
    Albuquerque, NM

  10. Curt
    5 out of 5

    :

    Hey Craig, my new shield is on and man is it great. I didn’t have a good idea of just how bad my old windshield was scratched, pitted and discolored until I took yours out of the box. Funny how you can look through it and not notice just how hard it is to see through. It mounted very easily, a perfect fit.
    Your personal service is very much appreciated, keep it up.

    Thanks
    Curt, one very satisfied customer

    Clarksville, TN

  11. Tony
    5 out of 5

    :

    I really like the slightly increased thickness of you shield, it helps cut down on some of the high speed buffeting. Plus, it took a pretty good bird-strike the other day without a problem… other than the bird not making it. So far, it seems to even clean easier than the stock windshield. Thanks again,

    Tony
    Indianapolis, IN

  12. Rick
    5 out of 5

    :

    Here are a couple photos of my ’98 Honda Valkyrie with Voyager Conversion Kit and new Clearview replacement shield. The shield was a perfect fit for the OEM Honda shield and installed in about 15 minutes. I got the 3″ extra tall shield, and it’s much better to look through the shield than over the top edge.

    Rick
    Silver Spring, MD

  13. Jim
    5 out of 5

    :

    The shield arrived yesterday in perfect condition. I installed it today and went for a short ride. Very very nice. The thickness gives it great stability. I am sure I will have many miles of enjoyment from your product.

    Sincerely,

    Jim
    Boca Raton, FL

  14. John
    5 out of 5

    :

    Just a line to comment on my recent purchase, a valkyrie tourer replacement wind shield. It fit the bracket perfectly, did not have the troublesome headlight hole that prevents the instalation of an accessory light bar, and is the most optically correct windshield I have ever owned. I have owned many windshields and motorcycles in my 40 years of riding, and I now feel I have the best in bikes and in windshields, and do not anticipate any changes in the future.

    John
    Auburn, KS
    40 year biker, best windshield I have ever owned!

  15. Dennis
    5 out of 5

    :

    Your Clearview replacement of my OEM shield is outstanding. Kudos! Above and beyond what I’ve spent many miles behind.
    The Lt Grey tint is perfect for reducing headlight glare, which has become annoying as my eyes seem to have aged a bit. I also don’t even seem to notice the tinting on either sunny or cloudy days. And, even more valuable to me is the multi-positional vent you installed for me. The flat-six Valkyrie engine radiates a fair amount of heat right up at the rider. Your Clearview replacement w/vent cools me down without any type of adverse wind effects.
    Think I’ll order another “just to make sure I have one” when this ones finally endured too much.
    Thanks for your quality product & services.

    Dennis
    Lakemoor, IL

  16. S. Nelson
    5 out of 5

    :

    Clear, small

    Although I was very happy with the performance and quality of my current 21″ Valkyrie Clearview Windshield, the height (which is the same height as the OE part), cut right across my line of vision (I’m 5’10 and with stock seat).

    So in deciding to go a little bit higher or a little bit lower (Clearview offers both choices), I decided to try the slightly lower 19″ version. After placing my order and waiting a few weeks, my new windshield arrived in perfect condition, very well packaged. Installation was a snap, holes lined up perfectly.

    Overall quality is outstanding, very high quality and a crystal “clear view”.

    The shorter shield looks great on the bike, more sporty appearing. On the road, I am now able to slightly see over the top of the shield, which is what I was hoping to accomplish. You can’t expect the 19″ shield to offer the same level of protection that the 21″ does (which is also 1″ wider), but it comes close.

    Overall this is a great choice which (depending on your height and seat) enhances the rider’s view and improves the bike’s appearance.

    S. Nelson
    Cypress, CA

  17. Herman
    5 out of 5

    :

    Small Clear

    Hi Mark, “It’s a nice beautiful windshield…if I ride tomorrow to a nice place, I will send you a picture”

    Thank You Very Much

    Herman
    Belgium

  18. Rene'
    5 out of 5

    :

    Clear Stock height with addt’l width

    “Tranlated from French”

    I received my new windscreen and I hurried to mount it. I find it far more transparent than the original and it looks much better quality.

    I am particularly satisfied with my purchase. I want to express the satisfaction I had in working this deal with you. You are incredibly effective.

    PS: If you wish, you can publish this comment and photos that my wife has taken just after installation.

    Very truly yours, wishing you a great weekend”

    Renè
    France

  19. Chuck
    5 out of 5

    :

    Stock Height, clear, with vent.

    Mark, Your service is great, don’t change a thing! I especially liked the emails letting me know where the windshield was in the production schedule. Also, the quick responses to my questions were very nice to get. Keep on keeping on!

    The quality is very good! I am a professional pilot (crop-duster), and have been flying for over 35 years. All of the 169 different planes I’ve flown have had plastic windshields, and I have seen the good and bad of optics over the years. This windshield has great optics. Truly a “clear view”.

    I’ve ridden about 500 miles behind this windshield, and am very pleased both with the quality and the wind protection. I haven’t had a chance to evaluate the vent yet, as it has yet to be over 45 degrees on any of my rides. But, from the great amount of air that comes through when I open it, I’m sure it will help a lot on a 95 degree day.

    Installation was very easy. Only took about 15 minutes, and all the holes lined up perfectly.

    Thanks!
    Chuck
    Waseca, MN

  20. Jack
    5 out of 5

    :

    22.5″ Clear w/adj vent

    Took a while but here are some pics with your windshield. Riding season was over here when it arrived last year. Installed this spring, looks great and the added height stopped the previous head buffeting that made riding at highway speed very blurry. Thanks for everything. I will recommend you to everyone looking for a better than OEM windshield.

    Regards,

    Jack
    Canada

  21. Albert
    5 out of 5

    :

    Valkyrie Rider with our 19″ Clear…

    Good Evening, I received my windshield Friday and installed it right away. It fit perfect as you already know…
    As soon as I rode my bike ride noticed a huge difference. My bike handles completely different in the wind. Partly due to the smaller size, but I really think due to the thickness, the windshield doesn’t flex as much. I think with the thin windshield, the wind could “steer” the bike by causing the shield to flex and act as a wing…maybe just the smaller size. Either way, the bike acts different, I love it!
    I think I read about your windshields on a Valkyrie website, or there was a link there…any way, I had bookmarked if for future reference.
    Thank You for a wonderful product and I will be dropping your name “Clearview Shields” to everyone I talk to about replacement windshields for their bikes.
    Completely Satisfied, Albert!
    Petaluma, CA

  22. Janenne
    5 out of 5

    :

    Hi Mark,

    Attaching a pic of a Clearview Shield on my 1998 Valkyrie trike.
    I have to say that you went the extra mile to help me get my shield shipped to New Zealand. It was received in a timely manner and I’m really happy with the new look of my ride.
    Thanks so much for your efforts…you guys at Clearview are as awesome as your product…!!! 

    Janenne
    New Zealand

  23. Scott Boyer
    5 out of 5

    :

    I bought a “Blemished” windshield 3 years ago…I’m still looking for that “Blemish” that’s supposed to be there.
    I hope you’re still selling windshields for Valkyries in 5 or 6 years when I need a new one. The OEM lasted around 10 years before the coating started coming off, since I didn’t know of you guys I didn’t replace it for a couple years and when I couldn’t stand it anymore I bought one from you…now that I know about you I won’t wait so long this time (I do hope it lasts another 10 to 15 years so I don’t have to replace it, with your quality that is possible).

  24. Joe
    5 out of 5

    :

    I have been wanting a Honda Valkyrie 1500 for about 10 years or so. I bought one last winter and the original Honda windshield was showing it’s age and miles (just like me). After looking around, and reading some reviews, I called these guys. I got an instant good vibe on the phone. These guys get it. After I placed my order, I was kept informed of the status via e-mail. When my shield arrived, the packaging simply couldn’t have been better. During installation, no drama. The windshield is stout, fits the stock bracketry perfectly, and is optically correct. I am taking the time to write this for the next guy ( if your reading this, then that’s you! ). If your doing what I did and doing some research, then good. Smart move. And you can stop looking now. You have found what your looking for. When people get treated badly, they tell everyone, but most people don’t talk about being treated well. Well I am. I got exactly what I paid for, start to finish, and I will be back. Thank you.

  25. Chris
    5 out of 5

    :

    Hi, I’ve had my clearview windshield for about a year now and I just thought
    I would send you guys a complement on how well your windshield performs. I
    never write reviews for anything I buy but I figured it could help folks out from buying countless windshields that don’t perform like they said they would.
    And I should know I have about a grand wrapped up in them. I chose a 2014
    street glide windshield size small with the recurve, which Is compared to
    about a 8 inch in other competitors shields. I’m 5’9″ and it is the pefect size for me, I can see over it and when I want to see threw it I can. I had bought a very similar shield from someone else and compared them in test rides and measurements, and found that the angle of yours sets back 3/4″ inch more
    and made all the difference in the world when it came to turbulence behind it and wind noise in my ears. You did your homework that’s for sure! The best
    part is the view when looking threw it is not distorted at all even with the recurve! Thanks again to the designers and owners at clearview…the search is over haha.
    Sincerely
    Chris T

  26. Rick / K5TIA
    5 out of 5

    :

    Add me to the list of happy Clearview customers. All the comments made on these reviews are true and correct. Bought a 19″ with vent window, light gray for a 99 Valkyrie. Shipped fast and well packed. Went on easy. About 2 inches below horizon, solid, butter smooth at 70 mph. Much better that the original which is too thin and flexy at speed. Pricy but worth it.

  27. Harold Tomlinson
    5 out of 5

    (verified owner):

    This screen is AWESOME. I’ve owned it for about 1 1/2 years. It transformed my Valkyrie Tourer. The oversized wind protection gives me a bubble that makes riding so much more comfortable. I love that thing, and it’s holding up great!

  28. James Fite, Jr.
    5 out of 5

    (verified owner):

    Bought my windshield for my 1999 Valkyrie! Love it,love it,love it! Best in the market!
    Thanks CS
    James from Rock Hill SC

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886