Phone: 800-798-6089

Honda Shadow Ace / Tourer Shields

5 out of 5 based on 12 customer ratings
(12 customer reviews)

$165.00$282.00

Shadow Ace/ Tourer windshields are pre-drilled and pre-contoured to mount to your existing OEM brackets.

5 Different Heights Available to Tailor the Shield Height to Your Height

2″ Added Width for Increased Protection for Your Arms and Shoulders 

SKU: HON-SATS. Categories: , .

Choose Width

The additonal 2" width is available on 20.5"L, 22"L and 23"L
+2 Inches

2 Inches Wider than Stock

Stock

Choose Height

How to choose the correct height shield

 

  17" L 2" Shorter than Stock
Stock 19" L
  20.5" L 1.5" Longer than Stock
  22" L 2.5" Longer than Stock
  23" L 3.5" Longer than Stock
  Measurement Location:
      • Length is measured in the center of the shield from the top of the headlight cutout to the top of the shield.
20.5", 22" and 23" Height options can not ship internationally due to the size of the container.
17 Inches
19 Inches
20.5 Inches
22 Inches
23 Inches

Choose Color

Clear

Allows 96% of the light to transmit through the screen.

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Vent Options

For more information about vents click here

HON-AT03 3
5 Position Adjustable Vent

allows rider controlled airflow to enhance comfort in warmer climates, and helps relieve back pressure, adjusts in 5 different positions

No Vents

Choose Special Cuts

Custom Lower Valkyrie Cut

Used for clearing Light Bars Turn Signals and Select Model Engine Gaurds

No Special Cut

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 31 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount to your Honda Brackets (we do not offer any brackets)
  • Designed with the Same Shape and Contour as the Stock Honda Shield
  • 5 Different Heights Available to Tailor the Shield Height to Your Height
  • 2″ Added Width for Increased Protection for Your Arms and Shoulders (Not Available in the 17″ and 19″ Height)
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • These Shields are Designed to Mount to the OEM Honda Brackets.
  • Clearview Shields are designed as “replacement” windshields. We do not offer any brackets/braces/framing or any other hardware.

Additional Information

Width

+2 Inches, Stock

Height

17 Inches, 19 Inches, 20.5 Inches, 22 Inches, 23 Inches

Color

Clear, Light Gray

Vent Options

5 Position Adjustable Vent, No Vents

Special Cuts

Custom Lower Valkyrie Cut, No Special Cut

12 reviews for Honda Shadow Ace / Tourer Shields

  1. Carl
    5 out of 5

    :

    I recieved my windshield as promised and am thrilled with it. I will also inform the forum of such, have already recomended you to another cycleist. It mad our ride from san diego to seattle so much better i didn’t believe it . thanks for all

    Carl
    Lake Stevens, WA

  2. Harry
    5 out of 5

    :

    Installed the new shield on my Shadow ACE Tourer today and it works great. Height is just right so that I can just look over the top of it. At 70 MPH there was very little helmet buffetting even going into a 12 MPH headwind.
    Thanks for the great product and keep up the good work.

    Live to ride!
    Harry
    Canyon Lake, TX

  3. Philip
    5 out of 5

    :

    22.5″ Clear

    Hello Mark! I have installed the windshield you made for my Honda ACE Tourer and I am delighted with your product. Installation was made easy and quick due to the precession of manufacturing . Clarity is crystal clear and the extra large size sure breaks the wind. Excellent product which I will highly recommend. Thanks again!

    Philip , Lake Geneva, FL

  4. Matt
    5 out of 5

    :

    I love the new windshield.
    WOW what a clearview …..

    Thanx yall are the best

    Matt
    Garland, TX

  5. Scott
    5 out of 5

    :

    I received my new shield yesterday in good shape, and installed it without difficulty. You do a thorough packing job, which is appreciated by both man and beast (per attached).

    I recently had occasion to ride the Tourer on a day with 25-35 mph winds, on roads including a crowded Interstate at 70+, city streets, and WV mountain roads. Depending on the direction of travel, the wind could be ahead, behind, or crosswind. Some of the crosswind gusts were strong enough to yank my helmet around (had the shield up), but the combination of windshield and bike prevented any drama. The bike never got nervous or darty – it just motored along.

    Quality is excellent!

    Many thanks for good service, reasonable pricing, and a well-made product.

    Scott
    Browns Summit, NC

  6. Steve
    5 out of 5

    :

    22.5″ Clear

    I have a 2000 Honda Shadow Ace Tourer VT1100. I purchased a new Clearview windshiled for my bike because tha original windshield just wasn’t cutting it. You made the windshield 3 inches taller and an inch wider on each side. I am 6’2 and boy did this make a diffrence. No more bugs and head buffeting. My wife has also noticed a great diffrence and now we can ride longer without being so tired. Thank you for a great windshield. I have included some pictures for you also.

    Thank You,

    Steve
    Elkmont, Al

  7. Bob
    5 out of 5

    :

    I just had to drop you a short note, I received my new shield a couple of months ago for my 1998 ACE Tourer. The installation was a “no brainer” as the shield was as you stated a direct replacement so everything lined up. After mounting the shield and a short test drive I removed the covering.

    After a couple of months I have to tell you this is one fine shield, the wind buffeting was way down to nothing, I can hear the engine, the slight tint helps at night with glare, and most of all (living in FL) the vent is awsome. This shield gets a lot of attention from fellow bikers and I recommend it every time I have the chance. Thanks for a great product.

    Bob
    Palm Coast, FL

  8. Kris
    5 out of 5

    :

    You’re shield is great. Fit perfectly and really helps block the wind off my head.

    Thanks again,

    Kris
    Corpus Christi, TX

    ’98 Honda Shadow Ace Tourer
    2 in. Taller shield w/vent

  9. Dave
    5 out of 5

    :

    21.5 with lower “Valkyrie Cut” and 5 position vent

    Mark, got the windshield and I really like it.

    I really like how it looks on my tourer. The vent works great – although since cooler weather has set in I’ll appreciate it more next summer.

    It does not shake near as bad as the stock one.The air flow around it is much better and I really like the Valkyrie cut as opposed to the stock design.

    You advertised this shield as a “blem”, but I haven’t been able to find it yet. So I am very pleased with the price and quality. Got a friend that wants to get one next spring.

    Dave
    Owensburg, KY

  10. Curtis
    5 out of 5

    :

    20.5″ w/lower Valkyrie Cut

    I wish to thank you & ClearView Shields for actually making a windshield for my bike. I was looking for another part for my Tourer on the web when I came across your ad for windshields.

    Finding anything for my bike is a task in itself & you actually had not one, but two styles. I was truly amazed. The fit was perfect as was the functionality.

    Thanks again,
    Curtis
    Chatsworth, GA.

  11. Fred Alexander
    5 out of 5

    :

    I have had this W/S for 5 years now.
    Got it taller than original because of head buffeting from the original one. Also got the light tint to better define the definition for pictures plus added the vent.
    This W/S is much stronger than original and doesn’t need the joining piece under the headlight for stability.
    The price is great as with the quality.
    The one I removed was already cracking around he bolts from stress from wind vibration.
    It took a couple of months to get mine because it had to be made and they are super busy with orders plus getting it past brokerage into Canada Customs (normally 7 – 10 days there in the long room) .Patience is a virtue
    You won’t be sorry with this purchase — hence my 5 star rating.

  12. John
    5 out of 5

    :

    I purchased my windshield quite a few years ago but just wanted to write to say that it performs as great as it did the first day I installed it. It continues to clean up very easily with just mild soap and water and is in fantastic condition, showing hardly a scratch. I would highly recommend it to anyone looking to add comfort to their VT1100, particularly if you are 6’7″ tall like me. It does all the things you want from a windshield – reduce noise, reduce air pressure, reduce cold wind, and provide protection. A great product.

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886