Phone: 800-798-6089

Honda CH80 Shields

5 out of 5 based on 3 customer ratings
(3 customer reviews)

$116.00$144.00

Our CH80 Shields are Ready to Mount for Fast & Easy Installation

2 Different Heights Available to Tailor the Shield to Your Height

Lower Black Masking Covers Lower Dash Area for a Clean, Finished Look

Mounting Hardware Included

SKU: HON-CH80. Category: .

Choose Color

Clear

Allows 96% of the light to transmit through the screen.

Smoke

Allows 49% of the light to transmit through the screen. Color appears as a brownish hue.

Choose Height

How to choose the correct height shield

 

  Measurement Location:
    Length is measured in the center of the shield from top to bottom.
 
16 Inches
20 Inches

Choose Width

Stock

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 31 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 1/8″ (.118) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount for Fast & Easy Installation
  • Lower Black Masking Covers Lower Dash Area for a Clean, Finished Look
  • Mounting Hardware Included
  • 2 Different Heights Available to Tailor the Shield Height to Your Height
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula

Additional Information

Color

Clear, Smoke

Height

16 Inches, 20 Inches

Width

Stock

3 reviews for Honda CH80 Shields

  1. Kenneth
    5 out of 5

    :

    Got the windshield and put it on. It works great and is an improvement to the scooter. The package was very well packed and arrived in perfect shape. Thanks for the quick delivery.

    Kenneth
    Ponca City, Ok

  2. Dwight
    5 out of 5

    :

    Enclosed are the pictures that we promised you! The installation was not at all bad, the holes in the bike where the bolts go are a little smaller than the hardware you supplied, but not a problem, we just drilled them out. My wife loves the new shield, and is happy that she no longer will have to wipe bugs juice off of her face and body. Thanks for a great product, if we can be of any assistance in the future please let us know.

    Regards,
    Dwight
    Bloomington, IN

  3. Albert
    5 out of 5

    :

    Great review on a Honda CH80 Scooter!

    Clear 16″

    Hello Mark,
    I am very happy with the Clearview shield I ordered for my Honda CH80 Elite scooter…

    I was always very anxious for the shield to arrive and it would have been nice to have a couple of automatic schedule updates during the wait. I know the shields are hand made, and the time to update customers takes from time that could be better utilized, so I’m sure it’s always a challenge. However I was very pleased with the prompt and courteous replies to my schedule inquires.

    When the shield arrived it was well protected by the peel off wrapping and sturdy cardboard shipping box. I initially didn’t see the mounting hardware in the box, and wasn’t expecting it to come with any. I actually went out to a hardware store and purchased some, but was glad I found the included nylon mounting screws, nuts and washers in the box before trying to mount it. The included black nylon hardware was more durable than the plastic rivets I had bought at the hardware store. I was very careful to check their length and only cut them to the needed length after measuring the length I needed twice! I didn’t think there would be room to just leave the mounting screws long inside the fairing because of the closeness to the headlight. The cut length worked out perfect and I ended up with about a quarter inch of threaded screw length protruding beyond the nylon nuts. I think the hardware you include is perfect for mounting the shield.

    I was also astonished with the clarity of the shield. Pictures do not do it justice. I think the shield material is a higher grade than is normally used for motorcycle windscreens. The black panel at the bottom also looks great and was flawlessly done. I was also happy with the way the height of the shield allows me to look over it. I was initially surprised by there being some air gap space at each corner of the base of the shield where it bends around the corners of the fairing. However this has not been any problem at all. I don’t notice any draft from it, and I’m sure it’s necessary to form it around the bend. It’s only noticeable when sitting on the scooter and looking down at the dash.

    While riding, the shield adds a tremendous amount of wind protection and comfort while being unobtrusive and fitting extremely well into the appearance of the scooter. On warmer days there is still plenty of air moving around me. On cold rides it’s awesome. While it doesn’t directly block the air in my face, most of it rides up the shield and over my helmet. If I need a little more protection, I can scrunch down slightly and feel even less air at my face. I am glad that I opted for the shorter of the two shield heights. Overall it has been a very valuable accessory that has added more than its cost to the value of my bike and my riding pleasure. It was well worth the wait!

    Sincere thanks,
    Albert
    Biddeford, ME
    October 2013

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886