Phone: 800-798-6089

1977-1993 Heritage / Fat Boy fits HD Non Detachable

5 out of 5 based on 1 customer rating
(1 customer review)


1977-1993 Heritage/Fat Boy w/ HD Non Detachable windshields are pre-drilled and pre-contoured to mount to your existing Harley Davidson OEM brackets.

Optional Upper Recurve Creates a Larger, Quieter Pocket

SKU: HAR-77HF. Categories: , .

Choose Recurve Options

For more information about recurves click here

No Recurve
Upper Recurve

• Pushes the Airflow 1.5" - 2" Higher • Creates a Better Pocket with a Shorter Shield • Makes the Shield More Rigid • Adds a Nice Look to the Shield

Choose Color


Allows 96% of the light to transmit through the screen.

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Height

How to choose the correct height shield


Shield measures 19.5 inches from square headlight cutout to top of shield or 14.5 inches from the center mounting hole to top of shield.

Choose Width

Shield measures 23.5 inches across the front side at its' widest point.

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 31 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount to your Harley Brackets (we do not offer any brackets)
  • Optional Upper Recurve Creates a Larger, Quieter Pocket
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • Shield is compatible with the adjustable window
  • Clearview Shields are designed as “replacement” windshields. We do not offer any brackets/braces/framing or any other hardware.

Additional Information

Recurve Options

No Recurve, Upper Recurve


Clear, Light Gray





1 review for 1977-1993 Heritage / Fat Boy fits HD Non Detachable

  1. Nansi
    5 out of 5


    Light Grey custom 13″ with recurve

    Attached are photos of your 13″ RC windshield installed on a 1988 FLHTC, showing the height, width and profile of the recurve.The lower profile of the shield enhances the looks of the bike, I think. I also like the thicker material used in your product – a real piece of mind when encountering oncoming grasshoppers and gravel on the highway!

    I have had to raise the shield so that the bottom edge is about an inch above the base of the speedo console and tilt the shield to a steeper angle in order to redirect the air flow above my head. Wish I would have had an additional 1/2 to 1 inch on the height to alleviate having this large a gap at the bottom.

    Superior product & great customer service! I will recommend your shields to others, including the shop where I have my service work performed.

    Thanks again!
    Pierce, CO

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886