Phone: 800-798-6089

BMW K75LT-K75RT & K100LT – K100RT Windshield

5 out of 5 based on 9 customer ratings
(9 customer reviews)

$195.00$297.00

3 Different Heights Available to Tailor the Shield Height to Your Height

1 Piece Design for Improved Air Flow

Nylon Collars to Insulate Screws and Help Protect from Over Tightening

Lower Black Masking Covers Lower Dash Area for a Clean, Finished Look

 Please note that the angle of this shield is based on the LT and will be slightly different than the stock angle on an RT windshield 

Choose Width

Stock

Choose Height

How to choose the correct height shield

 

Measurement Location:
  • Length is measured in the center of the shield from top to bottom.
  • The angle of our replacement is 47 degrees when mounted on the bike.
21 Inches
24 Inches
27 Inches

Choose Color

39948

Clear

Allows 96% of the light to transmit through the screen.

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Vent Options

For more information about vents click here

  • There are two options for the 5 position vent:
  • Standard position vent is 6 1/4" from bottom of shield to bottom of the vent.
  • High position vent is 10 3/4" from bottom of shield to bottom of vent. (If addtional Instruments have been added to the inner dashboard).
High Position Vent
Standard position
No Vents

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 31 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ (.187) Thick Material is More Rigid than the Stock Shield
  • Ready to Mount for Fast & Easy Installation
  • Lower Black Masking Covers Lower Dash Area for a Clean, Finished Look
  • 3 Different Heights Available to Tailor the Shield Height to Your Height
  • 1 Piece Design for Improved Air Flow
  • Nylon Collars to Insulate Screws and Help Protect from Over Tightening
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  •  Please note that the angle of this shield is based on the LT and will be slightly different than the stock angle on an RT windshield

Additional Information

Width

Stock

Height

21 Inches, 24 Inches, 27 Inches

Color

Clear, Light Gray

Vent Options

High Position Vent, Standard position, No Vents

9 reviews for BMW K75LT-K75RT & K100LT – K100RT Windshield

  1. Paul
    5 out of 5

    :

    My Clearview windshield arrived on Friday. On my ‘87 K100RT, it has eliminated most wind noise below 60 mph and significantly reduced the buffeting noise between 60-80 mph. It protects my arms from the cold, piercing wind and it does not cause a back draft or pressure on my back. As well, it does not flex in the wind as did the stock windshield. As an added bonus, for the first time I can see the road directly in front of me through the windshield. The stock windshield did not allow this view. I was concerned that the tint might be too dark, but no, it is just enough to reduce the glare. As with the stock,I am able to see over the windshield for a clear unobstructed view of the road.

    Thank you.
    Paul
    London, ON Canada

  2. Ed
    5 out of 5

    :

    Custom 22″ Light Grey

    Have had my Clearview shield for approx. 11 months. Ordered a 24 in. cut down to 22 in for my 86 K 100 RT. First day I noticed a major difference over the short stock shiel. Took a cross country trip to the East Coast in the middle of summer. Ennough of a breeze to stay comfortable al the way out and back, but great protection from bugs etc. I returned to Rain City, (Seattle) and rode every day through the winter, even in a few light snow storms. What a difference from stock. I am 6\’7\” tall and the clearview shield truly makes my BMW a year round motorcycle. great quality and the tint is just right. Definitely cuts down on glare, especially on the instruments at night. Great shield, great protection and great price.
    Thanks Ed

  3. Dennis
    5 out of 5

    :

    I purchased a 1990 K75RT this spring, and one of the first things I did was order a Clearview shield for it. I’ve been using a Clearview on my other bike for a few years now and have been extremely pleased.

    The light tint is a nice touch, and the center vent is positioned perfectly. In my opinion it’s a big improvement over the stock shield; quiet, reduced buffeting and great clarity.

    Thanks (again) for a fine product.

    Dennis MA

  4. Paul
    5 out of 5

    :

    BMW 21″ Clear

    Mark:
    I am very pleased with the shield for my 1991 BMW K75RT. I suppose the shield might be a bit nicer if it was 1 or 2 inches shorter, as I prefer looking over the shield to looking through it, but the shield is exactly the size I ordered so that was my slight error.

    It looks great on the bike and provides me a quiet and wind-buffeting free space!

    THANK YOU!
    Paul
    Montgomery, NY

  5. Brian
    5 out of 5

    :

    How are things state side? It has taken me a while to respond to the
    fact that I would send some pictures of my bike with the NEW windshield,
    BUT here are a couple.

    I did notice late last summer that it was very easy to remove the bug
    guts from the screen by soaking a towel in warm water, and just draping
    the towel onto the screen for a few minutes. The bugs just melted into
    the towel as if they knew they shouldn’t be there!

    Yours Truly
    Brian
    Ottawa, Canada

  6. Eric
    5 out of 5

    :

    21″ Light Grey

    I mentioned I would send over some photos of my 1991 K100LT BMW once your shield was installed. This is the 21″ high screen w/ lt. gray tinting. Worked great, thanks! I hope you can make use of these photos. Have a great New Year!

    Regards to all,

    Eric
    Long Island, New York

  7. Steve
    5 out of 5

    :

    I received the shield two days ago, installed it and took the bike for a test ride, and I want to tell you that I am very happy with the product. The fit and finish are great, and the modifications I asked for (non-standard location of the vent and reduction of the shield height) are spot on. I now have a true see-over windshield on my BMW K100, with better aerodynamics than the stock shield and a vent that directs airflow where I want it, or can be closed off on chilly mornings. I had previously tried a Parabellum aftermarket shield and returned it, unsatisfied. Your shields are clearly better than Parabellum’s, in my opinion.

    Regards,
    Steve

  8. Mike
    5 out of 5

    :

    BMW 21″ Clear w/5 position adjustable vent

    I’m really glad that I found your website. The windshield on my 1990 BMW K75RT was totally shot. The shop wanted $400.00 plus for a replacement so when I found yours it was a no brainer at $211.01.

    The vent is great. I live in the upper Mojave Desert so I get temps. from the low 20s in the winter and the 110s in the summer. I’m sure that the vent will help get rid of the low pressure area behind the windshield the sucks the hot engine heat up to my chest.

    Overall I think that you guys make the best replacement windshield around.

    Thanks a lot,
    Mike
    Ridge Crest, CA

  9. EJ
    5 out of 5

    :

    BMW 27″ Clear with adj. vent in high position:

    Installed my new shield and went for a 140 mile ride. I love the height of it. Thanks for a great product, was so worth the wait.

    EJ
    Mc David, Fl

Add a review

Your email address will not be published. Required fields are marked *

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886