Phone: 800-798-6089
Harley Electra Glide 10 Inch Clear Windshield
Harley FLHT Recurve pictureHarley Electra Glide Low Vent WindshieldHarley Electra Glide 6.5" Dark Grey Recurve WindshieldHarley Electra Glide 8 Inch Smoke WindshieldHarley Electra Glide Dark Grey Windshield RecurveHarley Electra Glide 10 Inch Windshield Smoke with Recurve

Harley Davidson 1996 to 2013: Electra Glide/ Street Glide/ Tri-Glide/ Limited Windshields

From: $89

Now in our 7th year of manufacturing this RECURVED version of our High Quality windshield to fit  your 1996 to 2013 Harley Davidson Bat Wing Tour Fairing. Effectively Designed with the top edge ever so slightly bent upward to provide 1.5 to 2″ of lift to the airstream without creating large amounts of turbulence and distortion that can be found in competing replacements. Available in 9 different heights to best tailor the coverage to your body size and bike modifications. With varying tints and an optional adjustable Vent to further reduce the low pressure and buffeting it creates, our windshields will be all you will need to make that long ride more comfortable.  This Harley Street Glide Windshield 1996 to present fits the models listed below.






SKU: HAR-SG96. Category: .

Choose Recurve Options

For more information about recurves click here

Harley FLHT Windshield Recurve
  • Clearview Shields has refined the concept of Re Curving the top edge to effectively enhance the airstream while keeping the distortion down to the lowest in industry.  This assures a Clear View of the road whether looking over or through the windshield.
No Recurve
Upper Recurve

• Pushes the Airflow 1.5" - 2" Higher • Creates a Better Pocket with a Shorter Shield • Makes the Shield More Rigid • Adds a Nice Look to the Shield

Choose Vent Options

For more information about vents click here

 Venting is an effective air management tool for any rider.  This concept helps to reduce the low pressure found behind any windshield or fairing which equates to a quieter ride.  Adjustable door allows rider control of direction and volume of that air flow to 5 positions  ranging from upper torso to head.  Vent will direct air stream up back side of screen when fully closed.
  • Clearview Shields offers Their 5 position Vent in the standard Low position or in our High  "Bagger" position compatible with most windshield pouches
  • Bagger Position
  • Standard (Low) Position
E Glide Vent Low
Bagger position
Standard position
No Vents

Choose Color


CLEAR ULTRA 2013 EGdARK gRAY 2013 EGSMOKE 2013 EG     Dark Grey Only available in 4.5"L, 6.5"L, 8"L, 9.5"L and 10.5"L

Allows 96% of the light to transmit through the screen.

Dark Grey

  Allows 17% of the light to transmit through the screen. Recommended only for the shields your looking over.  


Allows 49% of the light to transmit through the screen. Color appears as a brownish hue.

Choose Height

How to choose the correct height shield


E Glide Measuring
10.5 Inches
12 Inches
14 Inches
15.5 Inches
17.5 Inches
4.5 Inches
6.5 Inches
8 Inches
9.5 Inches

Choose Width


Product Description



For product availability and details Call us at 800 798 6089

  • Clearview Shields has been Handcrafting Shields in the USA for Over 27 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 1/8″ Thick Material is More Rigid than the OEM Stock Shield
  • Optional Upper Recurve Pushes the Airflow 1.5″ – 2″ Higher
  • Pre Formed & Ready to Mount for Fast & Easy Installation
  • 9 Different Heights Available to Tailor the Shield Height to Your Height
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula Please
  • NOTE: These windshields are designed to work with the 1996-2013 3 hole electra/ultra/street glide batwing fairings.
  • Other aftermarket fairings may not be compatible with this shield and it’s options

Additional Information

Recurve Options

No Recurve, Upper Recurve

Vent Options

Bagger position, Standard position, No Vents


Black, Clear, Dark Grey, Smoke


10.5 Inches, 12 Inches, 14 Inches, 15.5 Inches, 17.5 Inches, 4.5 Inches, 6.5 Inches, 8 Inches, 9.5 Inches



5.00 out of 5

45 reviews for Harley Davidson 1996 to 2013: Electra Glide/ Street Glide/ Tri-Glide/ Limited Windshields

  1. 0 out of 5

    (verified owner):

    HAR-E96G10R Smoke 10.5″ with recurve

    Hi Mark,

    The Windshield fits perfect.

    Looks nice and seems to be of very good quality.

    Reduces the turbulence a lot.

    Perfect for me, I´ll recommend you to more bikers around.

    Thanks & Regards
    Skellefteå, Sweden

  2. 5 out of 5


    Smoke 8″ with recurve

    Mark, here is my review of your windshield and service…

    I ordered a windshield on Tuesday (new 9608 Smoke) and made a mistake on my credit card info and Mark had to give me a call to get thing squared away. Once talking to him I changed my order to one of the “blemished” shields. Mark told me I would have trouble finding it and he is correct. I installed it as soon as it came in, which is today, Friday, and it fit perfectly and is of excellent quality. I replaced a 13″ tall stock windshield on my 2011 Ultra with a 8″ recurve. Took for a short test ride and had no more wind on top of the head than before, but I can now see OVER the windshield. Plus I like the looks!!!!!

    I don’t usually write reviews but my experience with Clearview has been so good, just thought I would say a few kind words.

    Thanks Mark, I will buy from Clearview again should the need arise.

    Columbia, KY

  3. 5 out of 5


    Smoke 10.5″ with recurve

    here is a picture of my 2012 Electra Glide Limited, the weather finally broke and the sun came out, snow left several days ago so I had a chance to go for a spin, wind shield looks good, deflects the wind as advertised with no buffeting of the front end. Would recommend this winshield to any one.

    Cardington, OH

  4. 5 out of 5


    Smoke 9.5″ with recurve

    Hi Mark,

    I’m keeping the shield. I went down to H-D and borrowed a 10″ Klockwerks Windsplitter. My wife then tested both of them at 70 mph with me.

    The Klockwerks unit was fine for me, including low side buffeting performance. The bubble was about one inch over my helmet at 70 mph. Jane had little side buffeting but she had helmet top buffeting at about 65 mph. She could feel it with her hand right at the top of her helmet. I also noticed some vibrating in the middle of the top edge of the Windsplitter.

    Your windshield had noticeably different performance. As the rider I had a little bit of side helmet buffeting, but not top buffeting at 70 mph. With my hand I feel about a 2-3 inch bubble over my head. The Klockwerks shield is a bit wider at the top and it has side lobes, so that is likely why it does better in this aspect.

    My wife had a much better experience. She had lower side buffeting and no top buffeting. She felt an inch of clear bubble above her helmet.

    The Klockwerks Windsplitter looks better on the bike but I am more performance oriented. Your unit looks good, more of a traditional look; whereas the other unit has more definite recurve and side lobes. That design just looks like it belongs on my bike better. The whole purpose of this change was to improve my wife’s ride, so yours is the winner.

    Smithfield, UT

  5. 5 out of 5


    Clear 15.5″ with recurve

    Hi Clearview!

    I was just able to purchase a new to me 2010 Harley Electric Glide Ultra Classic limited touring bike. The first thing I wanted to change on the bike was the windshield.

    The stock shield was way too short for me, since I am over 6ft tall. With a pocket of money I headed off to one of the largest Harley dealers in my area. As I was looking into the price, the dealership said “I would love to sell you a shield, but I think you would be far happier to order a 15.5” shield with recurve from

    Having never heard of the company, I went home and looked into what the dealership was telling me, I was impressed. Not only in the looks of the shield and the large amount of options and sizes to order to suit my needs. The dealership was now high on my list of being so honest and directing me to a better product.

    Long story short, I called the company (Clearview Shields) on Monday. Talked to the friendly staff, and ordered a shield, it was shipped and on my bike in less than a week. The shield was shipped in far more packing then I was expecting.

    I have had the pleasure of talking to them since I ordered and installed my shield and have had good dealing with them. I have sent many other riders to the company for custom shields and plan on sending more. It is refreshing to deal with a good company with an outstanding product.

    Willard, Mo

  6. 5 out of 5


    Smoke 10.5″ with recurve

    Another Happy Harley / Clearview connection!

    Here are a couple pic’s Mark , After 200 miles I am In a much better position to comment on the new 10.5″ shield I got from you guy’s for my 2012 Ultra .

    At 6′ and the stock seat I can see over the sheild which is what I wanted , The wind protection as far as head buffeting is as good if not better than the stock 12″ that came on the bike , if I want to look through the shield all I have to do is simply tilt my head down slightly.

    Very happy with it so far and the smoke tint looks way better than the clear, to me anyway .


  7. 5 out of 5


    Smoke 8″, RC, Custom height vent to allow for t-bags

    I recently purchased my first Clearview windshield. I chose the 8″ recurve with smoke tint and best of all, the installed vent! They offer the vent in two installation heights. I have the Harley dash mount GPS, so I chose the higher mount. I’m told it works well with the windshield bags too. It’s really a top quality product! Much thicker and sturdier than the previous aftermarket shield I was using. I like the vent for the hot summers. Great product and a great company to deal with! Excellent customer service and support!

    Vicksburg, MS

  8. 5 out of 5


    Smoke 8″ with recurve


    Sorry for taking so long to give you a ride report but here it is.

    After recently purchasing a 2008 Street Glide it was immediately apparent that it needed a taller windshield. I’m 6’4″ and with the stock windshield and seat I was getting absolutely hammered with wind in my face and helmet buffeting. With all the rave reviews about Clearview on the web, I decided to order a smoked, 8″ recurve. My plan was to head to Daytona Beach, FL for Bike Week in 5 days and couldn’t stand the thought of making that trip from Atlanta without the taller windshield. The order was placed online on a Sunday and when I called to follow up on Monday they went out of their way to get it shipped the same day so I would have it by Friday before my trip.

    My new Clearview windshield arrived as promised on Friday afternoon. Ten minutes later it was mounted on the bike and ready to roll. The next day I left for Daytona Beach in 38 degree weather, rolled in to Daytona Beach in 80 degree weather and couldn’t have been more pleased with the performance of this windshield. Helmet buffeting is minimal, mostly from the air coming under the fairing around the gas tank, and the view is absolutely crystal clear through the windshiled. The bike has a Mustang Super Touring seat which puts me 1″ higher and 1 1/4″ farther back than the stock seat. I could have easily gone with the next taller shield at 9 1/2 inches and still be able to see over the top. And although I prefer to look ‘over’ the windshield, these are so crystal clear that I would have no problem purchasing a much taller one for winter riding that I could look ‘through’.

    Bottom line: Great product (I got a ‘blem’ and couldn’t find anything wrong with it), great wind protection and great customer service at a fair price. I highly recommend the Clearview Shields.

    Atlanta, GA

  9. 5 out of 5


    Smoke 12″ with Recurve

    Good morning,

    I installed my Clearview Windshield on my 2011 Electra Glide Ultra Limited Thursday and I love it! The piece fit perfectly and went on without a hitch. It offers great wind protection and just looks fantastic on the bike. Please see the attached photo.


  10. 5 out of 5


    8″ Dark Grey with Recurve

    After reading the positive comments about Clearview, I decided to order it for my 06 Street Glide.

    I recieved the Clearview Shield ordered today in great condition and as promised. Took only few minutes to put on using OEM hardware. Looking good and Thank you for carrying great product.

    Escalan, CA

  11. 5 out of 5


    15.5″ w/Recurve and 5 way adjustable vent

    Hi folks….

    I actually have been meaning to write you to compliment you on my windscreen.

    I bought a tall “look through” windscreen in hopes it could make my wife’s ride on back a more pleasant one. Well, it does all that very well. And it’s not as bad as I thought it would be to look through. I ride all winter long (California), so this is my winter and touring with wife shield. I leave for work early and where I live, the day can start at 32 degrees often. This shield absolutely saves my butt.

    My wife now says my new bike (’09 ultra classic) is smoother and much less helmet buffeting than the old bike. Here’s the kicker. The old bike was a ’02 BMW 1200LT touring model with the electric height adjust on the windscreen. I think that says pretty good things about your windscreen!

    Thank you to everyone who took part in building my windscreen. Great Job!


  12. 5 out of 5


    Smoke 8″ with Recurve

    Hi Craig,

    My experience with Clearview Shields was outstanding. The shields were delivered when promised (a little early?) with the high quality that I’ve come to expect from your company.

    I bought one of your shields for my ST 1100 a few years ago and it is the best upgrade I’ve made. Attached are two photos of the Ultra shield…

    Best Regards,

    Jackson, MI

  13. 5 out of 5


    Clear 9.5″ with recurve

    Here is a picture of my 2010 H-D Ultra Classic Electra Glide with the 9.5″ Clear Clearview windshield with recurve installed.

    Before ordering a clearview windshield I had a stock 12″ windshield and thought it was great until after you ride with it on long distance rides. I had trouble seeing through it after it got bug infested and if I happened to hit rain.

    I then ordered the Clearview windshield and with the fast turn around I was surprised when I received it in the mail 4 days later. My wife and I went for a ride with the new windshield and I could not tell the difference from my 12″ stock windshield except now I’m able to see over the top of the shield and am able to see the road more clearly.

    After the ride there were bugs on the windshield but not one time did I get hit in the face by one. You can tell when riding how the recurve pushes the wind up over you giving you a nice riding pocket.

    Clearview has great customer service and I plan on buying another Clearview windshield next spring but trying to decide if I want the smoke or dark grey tint.

    Albany, Mo

  14. 5 out of 5


    Dark Grey 8″ with recurve

    Just a note to say “thanks” for the very quick service. I received my windshield yesterday in fine shape. It looks great on the bike! I can’t believe how quick it arrived!

    Thanks again,
    Port Orange, Florida

  15. 5 out of 5


    9.5″ Smoke tint with recurve


    Prior to ordering a windshield from your company, I was the typical rider that was set on sticking with my stock 12″ clear windshield. My friend painted my 2003 Electra Glide Classic and insisted that I change to a lower darker windshield. I was hesitant but followed the directions on your site to determine what height windshield would be right for me. It was a Smoke Tint, 9.5 inch with a re-curve. Mark explained to me that a 9.5 inch shield with the re-curve was equivalent to a 12″, needless to say I was a little worried that it would give off too much wind.

    I have been happy with the new windshield from the first ride. Besides finishing off the look of the bike (see for yourself), I get the same amount of wind as my stock 12″ shield and my line of site is over the shield. Not having the top of the stock windshield directly in my site and seeing over the shield has made rolling through the turns even more enjoyable than before.

    At this point I wish that I had made the switch to a custom windshield sooner. The service and shipping from Clearview Shields was “top of the line,” so much that I even purchased a shield for my friend.

    Thanks to Clearview Shields,

    Olney, MD

  16. 5 out of 5



    Received the new shield and, as before, we are truly satisfied with your product!! Your windshield allows us to ride farther and longer and greatly reduces the amount of wind on the passenger. Keep up the good work!!!

    Upland, Indiana

  17. 5 out of 5


    8″ Smoke with recurve

    I received my windshield just in time for a trip from Tacoma, WA to South Padre Island, TX. I love it! It is a 8″ shield with the recurve and it worked perfectly. Thanks for making a great windshield.

    Buckley, WA

  18. 5 out of 5


    Here are the pictures of my 2010 CVO Ultra with the shield, hope you can use them.

    Once again thanks for all your help and hospitality when I was there recently.

    I really love the new windshield in looks and performance.


  19. 5 out of 5


    I have a 07 harley CVO Red Jester. I have 2 clearview shields that I love!

    Smithville, TN

  20. 5 out of 5


    Clearview Windshields

    Many Harley-Davidson Ultra Classic riders, including this writer, complain about the top of the stock windshield being right in the rider’s line of sight. There are many alternatives, shorter and taller, available from HD as well as several after-market manufacturers. The choice for this review was a unique design that incorporates a ‘recurve’ to the top of the windshield to direct wind, bugs and rain further up and over the rider’s head. The claim is to provide a ‘rider pocket’ behind the windshield that is as good as that provided by the stock windshield even though the height is only 9.5”; 2.5” shorter than stock.

    The shield is manufactured by Clearview Shields of Bailey, CO. Clearview makes shields for most makes of motorcycles. Email with the year, make and model of your scoot and they will respond with an e-brochure of fitments available for your bike. Customer service is responsive and helpful answering questions and explaining the differences between their choices, as well as makers. Their choices include shields that are available in many heights and widths; clear, smoke tinted or opaque black (for the short, sport shields); some available with optional vents – for a custom fit and finish tailored to you – the rider.

    The quality of the materials is evident upon opening the package. The shield is well packaged to prevent damage, including a film coating on both sides that is to be removed during the installation process. After removing the film it is ‘clear’ that any optical effect is negligible, even with the smoke tint included on the test shield. The shields are D.O.T. approved.

    Installation is simple. Remove the three torx-head screws on the front of the batwing fairing, remove the stock shield and put on the new shield (be sure to follow torque specs to not damage the shield or fairing). It is immediately noticeable the line of sight issue was solved. Now for a ride to check out the wind effect…

    Riding at varying speeds, this writer noted that the ‘rider pocket’ does in fact seem to be at least as good as the stock 12” shield. The easiest description of the ‘recurve’ is to say the shield slopes up toward the rider as the stock does, but then a few inches below the top, it curves away from the rider, toward the front of the bike. The recurve does seem to force the air flow (and bug flow) forward and up, clearing the rider’s head just as advertised. It does allow a little more rain to get to the rider, but not a significant amount. Added bonuses to this writer are it now allows wearing of a baseball cap – bill forward (which was not easily done with the stock shield) and the airflow is directed further around the sides, keeping more wind off the hands. The only improvement to suggest would be if manufacturer polished the edges of the shield for an even higher quality look.

    Clearview Shields can be recommended as a good buy and should be checked out if you’re thinking of replacing your windshield for any reason. Be sure to tell them ‘bogie’ sent you.

    Woodstock, IL

  21. 5 out of 5


    8″ Smoke with recurve

    Here are a few photos of my 06 Electra Glide with the Clearview 8″. I really love this windshield and it was a great investment. I can see over the shield perfectly but do not get blasted my the oncomming wind. Road in the rain last week without any problems. Much better that those eBay shorties.

    Los Fresnos, TX

  22. 5 out of 5


    12″ Smoke with recurve

    Bought my 2006 Harley Davidson Street Glide with a cool looking 4″ factory windshield that left my ears ringing for days. I went to an aftermarket 8″ smoked windshield that was much better. Then I bought the 8″ Clearview with the Recurve. What a difference. The quality is incredible…not a flat piece of plexi like the others, but a preformed, thick windshield that stands up to the wind (had it up to 90 MPH the other day), and has fantastic clarity. The Recurve feature is what really makes it. You’d have thought I’d gone to a 12″ windshield…what a difference!

    Baltimore, MD

  23. 5 out of 5


    6.5″ Dark with recurve

    The stock 6 1/2 inch windshield that was on my bike caused the wind to hit me right in the glasses. Obviously, this isn’t a good thing. By swapping it out with the Clearview Eurolip 6 1/2 windshield, the wind now goes over my head without having to install a taller windshield. It gives me the look that I want and the functionality that I need.
    Thanks for a great product!

    Campbell, CA

  24. 5 out of 5


    We both love the sheilds, for the first time she is able to see over a windsheild comfortably, and the 9.5 on my Glide is perfect at 6’2″ to see over, both without being buffetted by wind, the curve gives a great little lift to the wind and makes the ride pleasurable – less wind noise to – great for tunes on the Glide! The tint is perfect on mine, looks good but able to see thru fine.

    Mt Pleasant, MI

  25. 5 out of 5


    Thanks again for the great shield and fantastic customer service!

    Brighton, MI

  26. 5 out of 5


    Attached are pictures of my 2005 H-D Electra Glide Ultra with your 8″ smoked windshield installed. I found it to be terrific quality and the fit is perfect. I will no problem recommending your product to others.


    Robbinsville, NJ

  27. 5 out of 5


    Here are some pics of my ’06 Street Glide with the smoke 8 1/2″ recurve. Looks great on the bike! And with me being 6′ tall, it gives me plenty of wind protection. Good product….I’m a happy camper. :-)

    New Kensington, PA

  28. 5 out of 5


    I received the 8″ windshield for my Harley Ultra Classic. It is GREAT!

    McConnells, SC

  29. 5 out of 5


    Clear 14″ with recurve

    Windshield works great! Went on a 3100 mile ride a week ago, it cut down on the turbulence quite noticeably! Thanks!

    Joseph, OR

  30. 5 out of 5


    9.5″ Dark Grey with Recurve

    A great order experience from start to arrival to installation.

    Thank you.
    Toronto, Canada

  31. 5 out of 5


    8″ Smoke w/Recurve





  32. 5 out of 5


    Smoke 17.5″ with recurve from our “Discounted” inventory.

    I got the shield today and mounted it. I noted where the blems were marked. After I peeled off the film, I couldn’t find the blems.

    Looking very hard, I could see or imagine something where they were supposed to be.

    I am very pleased with the shield and it reduced the helmet buffeting I had.

    thank you
    Elkmont, AL

  33. 5 out of 5


    8″ Dark Grey with Recurve

    Another happy Harley rider…

    Mark, Well the wind-screen arrived in a timely fashion. I installed same and 2 days later went for a ride and “IT WORKS”. I knew that if we worked at it we would be successful. If I have any Brother Firefighters that need a wind-screen, I’ll turn them on to “Clearview”. Sometimes when we get together as a group it can be 3,000 plus, like at the N.Y. rally. to bad you can’t come to Butte, Mt.

    Respectfully, Dave
    Maywood, NJ

  34. 5 out of 5


    Dark Grey 9.5″ with recurve

    Hey Mark,

    The windsheild arrived Friday and installed Saturday, what a great product I’m 6’4″ and the 9 1/2 recurve works better than the stock 12″, I even think it fits better than the stock one, it went on like a breeze. The dark grey tint is perfect also, thanks for the great service.


    Englewood, FL

  35. 5 out of 5


    9 1/2″ with recurve

    Another improved riding experience with a Clearview Shield!

    I rarely give reviews but I thought it appropriate for this purchase. As a matter of fact, one of the main reasons I purchased from Clearview was because of the reviews they publish on their site.

    I purchased a 9 1/2″ clear windshield for my 2002 Harley Electra-glide Ultra Classic. I have owned it for about a year and a half and have always been annoyed by the windshield height. As many others before me have noted; the OEM windshield is virtually at eye level. It is maddening to look through/over.

    I had tried several other manufacturer windshields that were available for test drives at local Harley dealers. Quite frankly, either they weren’t effective. They were either too low, too high or too flimsy.

    It took a little longer than I expected to receive the windshield, 9 days I think, but it was worth the wait. I went on a 3 day 500 mile trip two days after I received and installed it. Guess what? It was heavenly! The re-curve did kick most of the wind up over my helmet. I had minimal buffeting but I suspect you non-helmet wearing folks wouldn’t even notice. It was so awesome seeing the road, and vehicles in front of me, without craning my neck up or down.It also made a huge difference when going into turns. The lower height and shape created an unrestricted view of the road as I leaned into the turns.

    I am totally satisfied with this product. My only wish is that I also had a smoked version. I think it would look cooler but I didn’t want to take a chance that it might hinder my vision-particularly at night. Now that i have driven with the clear windshield I am fairly convinced the smoked would have been fine. Oh well, maybe next Christmas. See you on the road!

    Waukesha, WI

  36. 5 out of 5


    Dark Grey 8″ w/Recurve

    Mark, I got the shield on Monday and put it on. It is perfect!

    I did a search on google for the best motorcycle windshields and ended up reading a lot of forums recommending a bunch of different shields. Yours came up quite a few times. I have already tried two different klockwerks and two harley shields. Yours is by far the best! I am in the Army and ride with quite a few guys. I will definitely recommend yours to all the guys I work and ride with.


    Big Al
    Riverview, FL

  37. 5 out of 5


    I just received my order for a Clearview windshield for my 1999 H-D Ultra Classic. I must say that when I opened the box and saw the quality of packing, I was very much impressed! First Class!!!

    But I was even MORE impressed when I put the windshield on the bike and ripped off the protective plastic covering. The windshield was cut to perfection and absolutely (as your name implies) CLEAR.

    That’s the best looking windshield that I’ve seen, bar none. Did I mention – I am totally pleased with the product and with the sales assistance given me. I will certainly be recommending you to others for their needs. Please feel free to refer prospective customers to me for reference.

    Thanks again,
    Friendswood, TX

  38. 5 out of 5


    I just wanted to let you know the shield arrived and I finally got to ride with it. Outstanding! Low noise level, I can see over the shield and no vibration at the top of my head/helmet. Thanks for a super product! Cheers!

    St Jacob, IL

  39. 5 out of 5


    Just wanted to let you know that my buddy and I have traveled 8,000 miles since we left Massachusetts with the two Clearview shields that you sold us.
    We love them!

    Lincoln, MA

  40. 5 out of 5


    8″ Smoke with recurve

    I received the Clearview windshield I ordered and I am very happy with it. I went with the 8″ shield with the recurve and smoke tint.
    It’s the perfect height and really improves the riding experience at highway speeds.

    Mableton, GA

  41. 5 out of 5


    12″ Smoke with recurve and adjustable vent in “bagger” position

    Sorry about the delay, to much working and bad weather. Love this windshield! Vent works fantastic. Plenty air on those hot days to help cool you off while riding and closes to keep you warm on the cool nights. Great looking windshield! Pictures attached. Thanks.

    Covington, LA

  42. 5 out of 5


    Clear 15.5″ with recurve

    I purchased a clear view shield for my 08 Electra-glide about 4 years ago. The on-line service was great and your product is high quality. About six months ago, a crack developed starting at one of the attachment points (due to a service technician not seating the shield properly when replacing it during service). Called you and stated I was going to Sturgis and you were able to send a replacement shield with your group going to Sturgis. Arrived at Sturgis and your representative kindly installed the new shield and it is working well. I am pleased with the quality of your product and with the service both on-line and in person. I recommend your products to anyone who asks where I got my shield.

    Pinehurst, NC

  43. 5 out of 5


    Hi My name is Don and I purchased a 8.5 inch light smoke windshield and love it. Being 5’4, this shield is the perfect fit. The service was great….when I called to order it, most off the staff was at the Sturgis Rally.

    The gentleman that helped me was great despite all the calls he was getting. Very pleasant experience. For that, I say thanks you again, it was a pleasure doing business with Clearview.

    Allen, TX

  44. 5 out of 5


    Smoke 12″ with recurve


    Shield came…looks great… fit great.

    Thanks for all you help.

    Denver, CO

  45. 5 out of 5


    Hi Mark, here are photos of my bike as promised. 2013 Electra Glide Classic with the 6.5 smoke shield with recurve option. With the stock windshield I have to wear goggles, because my eyes tear up. However, even with this relatively short windscreen I can wear regular glasses and no wind gets into my eyes. This is the third Clearview windscreen I’ve had over the years with different motorcycles, and in my opinion there is absolutely no competition as far as fit, finish, durability, functionality, and appearance. Your product looks and performs much better than advertised. I recommend your product to everyone I know that wants to replace their stock windscreen.

    Thank you Clearview!!

    Rogers, Arkansas

  46. 5 out of 5


    When I buy a Harley, the first thing I order is a new Clearview shield. You can’t beat the price and they work!

    If you are riding in the rain, you need to be able to look over the windscreen. That requires proper sizing. The sizes and recurve are the the perfect solution. Clearview has also been very good about exchanges, if you don’t get the size right. They actually talk to their customers.

    BTW if you ride two up, loaded, or if you are planning to change seats. You might want to take those height measurements in the riding configuration you prefer.

    We just take a short weekend trip, make the measurements, then order the shield.

Add Review

Add a review


Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886