Phone: 800-798-6089
MS-BW014R Clear 14" with Recurve
Memphis Shades Batwing 14 inch clear with recurve

Memphis Shades Batwing Fairing

From: $89

SKU: MEM-MSBF. Category: .

Choose Recurve Options

For more information about recurves click here

  • Optional Upper Recurve Pushes the Airflow 1.5" - 2" Higher
  • 14"H COMES ONLY WITH THE RECURVE
No Recurve
Upper Recurve

• Pushes the Airflow 1.5" - 2" Higher • Creates a Better Pocket with a Shorter Shield • Makes the Shield More Rigid • Adds a Nice Look to the Shield

Choose Color

330

  • Dark Grey only Available up to 11" Height
 
Clear

Allows 96% of the light to transmit through the screen.

Dark Grey

  Allows 17% of the light to transmit through the screen. Recommended only for the shields you're looking over.  

Light Gray

Allows 75% of the light to transmit through the screen.

Choose Height

How to choose the correct height shield

 

Measurement Location:
    Length is the exposed part of the shield measured from the top of the shield down to the upper part of the fairing.
 
11 Inches
12.5 Inches
14 Inches
8 Inches
9.5 Inches

Choose Width

Stock

Product Description

  • Clearview Shields has been Handcrafting Shields in the USA for Over 25 Years
  • Top Rated by Riders Around the World in Performance, Quality, Fit and Finish
  • Premium High Impact Acrylic Blend Material Exceeds Industry & DOT Standards
  • UV Inhibitors Extend Shield Life & Provide Protection for the Dash and Acc.
  • 3/16″ Thick Material is More Rigid than the Stock Shield
  • Optional Upper Recurve Pushes the Airflow 1.5″ – 2″ Higher
  • Pre Formed & Ready to Mount for Fast & Easy Installation
  • 5 Different Heights Available to Tailor the Shield Height to Your Height
  • Shipped with a Protective Film that allows Installation and Testing
  • Can be Polished, Buffed, and is Safe to use Rain-X Original Clear Formula
  • Dark Grey only Available up to 11″ Height

Additional Information

Recurve Options

No Recurve, Upper Recurve

Color

Clear, Dark Grey, Light Gray

Height

11 Inches, 12.5 Inches, 14 Inches, 8 Inches, 9.5 Inches

Width

Stock

5.00 out of 5

4 reviews for Memphis Shades Batwing Fairing

  1. 5 out of 5

    :

    Clear 14″ with recurve

    Review as posted on HDforums.com

    The weather has finally (!!) improved from the -11F at my house last week so I took the
    opportunity for a quick test of the Clearview windscreen installed on my MS Batwing.

    While I was happy from mile one with the Batwing, the stock 9″ MS windshield still created
    more turbulence at the top of my helmet than I liked so I decided to go with a Clearview
    recurved replacement.

    It’s freaking perfect..

    It’s still not very warm here so I only took about a half hour ride, but I hit “significant” speeds and the turbulence was completely gone. None. Nada. Nunca. Zip. The wind noise was
    much, much lower but there was still plenty of air motion around my face and body; it just
    wasn’t turbulent or high velocity.

    I used the 14″ Clearview deciding to go for overkill rather than miss the mark. Others
    may have just as good a result with a lower screen.

    Mike
    Albuquerque, NM

  2. 5 out of 5

    :

    Clear 14″ with recurve

    “I recieved my windshield last friday and put it on my bike. Test rode all weekend. I’m ready to give my review. ” WOW ” :)

    Quality shield, excellent blockage and my ride enjoyment skyrocketed !! :)

    Plus the price was very resonable !! GREAT JOB GUYS !! I will promote your product whenever I can !

    Thanks again !
    Steve
    Scottsdale, AZ

  3. 5 out of 5

    :

    Clear 14″

    Mark–

    I have had a chance to ride with the 14″ for a couple weeks now, and it does a great job of keeping the wind off me.

    Some mornings have been in the mid 30′s and still comfortable with the wind deflection. Also did great in the rain. Attached are several pictures of the shield and my Roadliner.

    Thanks,
    Bill
    Byron, GA

  4. 5 out of 5

    :

    clear 14″ with recurve

    I was totally stoked when I came across your site on the internet and found that you made a shield that fit the Memphis shades
    Batwing fairing.

    One of the biggest complaints on their shields is they only go to 12 inches…I’m 6’5″ and this is a big problem for me.

    When I talked with Mark three weeks before I was leaving for Sturgis he told me you could have it to me in time for my ride and You did! Quality was great, riding behind it was even better. The shape, the quality…I’m just totally happy with it. I rode 3000 miles with it in nine days and can’t say enough good about it. Fit was perfect, simple to install.

    Was great to meet you guys in Sturgis and have the chance to tell you what I thought about your product. I have told others about your product and will continue to do so. It’s not every day you’re totally satisfied with something you order, but not the case with this shield! Perfect in every way and very pleased with the Price.

    Thanks again!!

    Robert

    Arizona

Add Review

Add a review

*

Care and maintenance instructions

Order by Fax

Click here to print out a fax order form
Fax Number: 303-838-6894

Order by Phone

Toll Free: 1-800-798-6089
Local & International: 303-838-0886